2001 Rover 75

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sil corroded. (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Exhaust has a major leak of exhaust gases back box (6.1.2 (a))

Rear Exhaust system insecure back box bracket snapped. (6.1.2 (a))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear tyre worn inner edge

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Steering column top bearing slightly worn (2.2.2 (b))

Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear tyre worn inner edge

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Steering column top bearing slightly worn (2.2.2 (b))

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Exhaust system not adequately supported (7.1.1)

o/s/front tyre is worn on inside edge

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Front Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Inner Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Brake pipe excessively corroded (3.6.B.2c)

Offside Inner Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

both rack ends have slight play

Parking brake: efficiency below requirements (3.7.B.7)

both rack ends have slight play

Front Brake pad(s) wearing thin (3.5.1g)

front brake disc,s are worn

n/s front tyre is wearing on inner and outer edge

o/s front trye is wearing on inner and outer edge

Front Brake pad(s) wearing thin (3.5.1g)

Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

front brake disc,s are worn

n/s front tyre is wearing on inner and outer edge

o/s front trye is wearing on inner and outer edge

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)