2001 Peugeot 206

Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i))

Brake performance not tested (1.2.1 (g))

Emissions not tested (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases centre pipe (6.1.2 (a))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Side repeater incorrect colour (4.4.3 (a))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Macpherson strut corroded and seriously weakened spring cup (5.3.3 (b) (i))

Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Side repeater incorrect colour (4.4.3 (a))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Axle has excessive vertical movement between stub axle and axle beam such that directional stability is impaired (5.1.2 (c) (ii)) DANGEROUS

Offside Rear Brake pipe at imminent risk of failure or fracture across axle (1.1.11 (a)) DANGEROUS

Fluid leak, but not excessive coolant leak (8.4.1 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Axle has slight vertical movement between stub axle and axle beam (5.1.2 (c) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Stop lamp not working (1.2.1b)

Nearside Front Direction indicator not working (1.4.A.2c)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Direction indicator not working (1.4.A.2c)

n/s wiper wrong size.

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Side repeater incorrect colour (1.4.A.2f)

Rear registration plate deteriorated (6.3.1d)

n/s wiper wrong size.

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Rear Brake load sensing valve linkage seized (3.6.E.3)

Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Track rod end ball pin shank loose (2.2.B.1c)

Rear wiper blade in poor condition

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Registration plate lamp not working (1.1.C.1d)

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

steering rack worn