2005 Toyota Aygo

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Brake pipe excessively corroded front -to- rear (1.1.11 (c))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake operation has insufficient reserve pressure/vacuum to provide assistance for at least two more brake applications after the warning device has operated (or gauge shows an unsafe reading) (1.1.3 (a) (ii)) DANGEROUS

Front Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Vehicle structure is deformed but structural rigidity is not significantly reduced under (6.1.1 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Vehicle structure is deformed but structural rigidity is not significantly reduced under (6.1.1 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Exhaust mounting defective rubber hanger missing (6.1.2 (a))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Exhaust system insecure (6.1.2 (a))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Stop lamp has light sources not illuminating, but not more than 50% high level (1.2.1b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside rear brake binding (3.7.B.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Stop lamp has light sources not illuminating, but not more than 50% high level (1.2.1b)

Front registration plate insecure (6.3.1b)

front tyres approaching wear markers

Offside Registration plate lamp not working (1.1.C.1d)

front tyres approaching wear markers

Brakes imbalanced across an axle (3.7.B.5b)

Centre Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Headlamp aim too low (1.8)

Parking brake: efficiency below requirements (3.7.B.7)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Items removed from driver's view prior to test

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

air bag lamp lit showing fault

front brake discs have light corrosion on the inner faces

rear registration plate slightly deteriorated

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp not working on main beam (1.7.5a)

front brake discs have light corrosion on the inner faces

rear registration plate slightly deteriorated

Front Windscreen wiper blade insecure (8.2.2)