2005 Fiat Panda

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Windscreen wiper blade defective (3.4 (b) (i))

Rear Exhaust has a minor leak of exhaust gases Silencer (6.1.2 (a))

Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front brake r clip missing

Exhaust system insecure (6.1.2 (a))

Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front brake r clip missing

Exhaust system insecure (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front brake r clip missing

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front brake r clip missing

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge worn outer edge 3 mm tread (5.2.3 (e))

mid exhaust mount corroded off pipe , rear silencer peeling /poor condition

Exhaust mounting defective middle mount corroded off pipe , rear box very poor condition, rear clamp missing (6.1.2 (a))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. o0s slower /lower (1.2.1 (b) (i))

Nearside Rear brake readings slightly low

Windscreen wiper not working (3.4 (a))

Exhaust mounting defective middle mount corroded off pipe , rear box very poor condition, rear clamp missing (6.1.2 (a))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. o0s slower /lower (1.2.1 (b) (i))

Nearside Rear brake readings slightly low

Offside Rear tyre pressure very low

Rear exhaust poor condition /peeling

front strut tops have play both sides

mid exhaust bracket broken off pipe, rear box peeling

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Front Tyre worn close to legal limit/worn on edge osf totally bald inner edge (5.2.3 (e))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

front strut tops have play both sides

mid exhaust bracket broken off pipe, rear box peeling

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Front tyre perishing

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front tyre perishing

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Valve stem slightly damaged valve stem splitting at base. (4.1.D.1e)

Offside Rear coil spring corroded (2.4.C.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Front tyre perishing

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front tyre perishing

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Valve stem slightly damaged valve stem splitting at base. (4.1.D.1e)

Offside Rear coil spring corroded (2.4.C.1b)

exhaust system corroding

Nearside Front front brake binding (3.7.B.1)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

exhaust system corroding

offside front brake binding slightly

Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded on axle (2.4.A.3)

Windscreen wiper does not clear the windscreen effectively both (8.2.2)

Nearside Rear Lower Suspension spring mounting prescribed area is corroded but not considered excessive axle (2.4.A.3)

exhaust rear section baddly corroded

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

exhaust rear section baddly corroded

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Lower Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Brakes imbalanced across an axle (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

advise both front wipers spliting