2008 Kia Ceed

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Brake lever has insufficient reserve travel hand brake (1.1.2 (a))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Service brake excessively fluctuating (1.2.1 (e))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear handbrake performance poor

Suspension arm pin or bush worn but not resulting in excessive movement both rear trailing arm bushes (5.3.4 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Parking brake inoperative on one side both (1.4.1 (a))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both rear trailing arm bushes (5.3.4 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Brake lever has insufficient reserve travel (1.1.2 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub-frame corroded next to rear bush mount (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

advice n/s +o/s rear brake disc back plates corroded

Brake lever has insufficient reserve travel (1.1.2 (a))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Steering locking device missing track rod end castle nut split pin missing (2.1.3 (d))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Steering rack retaining devices dangerously loose mounting bolts loose (2.1.2 (a) (ii)) DANGEROUS

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

advice n/s +o/s rear brake disc back plates corroded

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Under trays fitted

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Brake pad(s) less than 1.5 mm thick Metal on metal (3.5.1g)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Stop lamp not working (1.2.1b)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Under trays fitted

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Fuel tank insecure (7.2.1) DANGEROUS

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Windscreen washer provides insufficient washer liquid (8.2.3)

rear parking (secondary) brakes imbalanced (3.7.B.6b)

Oil leak

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Headlamp aim too high (1.8)

Offside Front position lamp(s) not working (1.1.A.3b)

Parking brake lever has no reserve travel (3.1.6b)

Oil leak

Nearside Stop lamp not working (1.2.1b)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)