2010 Audi A3

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Windscreen washer not working (3.5 (a))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Coil spring insecure (5.3.1 (a) (i))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Shock absorbers insecurely attached (5.3.2 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 205-55-16v (5.2.3 (e))

engine cover and under trays fitted

Emissions tested for 0.50 plate , as per DVSA instructions , emissions too low for smoke meter pick up

Engine covers and vehicle undertrays , not allowing full inspection of some components

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge 1.6mm (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge 1.6mm (5.2.3 (e))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Emissions tested for 0.50 plate , as per DVSA instructions , emissions too low for smoke meter pick up

Engine covers and vehicle undertrays , not allowing full inspection of some components

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge 1.6mm (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 1.6mm (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge 1.6mm (5.2.3 (e))

Covers fitted

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

engine bay covers fitted

under trays fitted

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Tyre worn close to the legal limit on 1.6mm (4.1.E.1)

engine bay covers fitted

under trays fitted

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

All brake discs corroded

Child seat fitted not allowing full inspection of adult belt

Engine covers fitted obscuring some components in the engine bay

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components