2011 Yamaha YBR125

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Mudguard insecure ()

High beam indicator inop

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Wheel alignment slightly misaligned (2.4 (a))

Front Mudguard insecure ()

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Mudguard insecure ()

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Wheel alignment slightly misaligned (2.4 (a))

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front position lamp does not illuminate immediately when switched on Side light bulb inoperative (1.1.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Roller brake test indicates a sticking brake (3.3.A1a)

Brake fluid reservoir fluid level dangerously low (3.2.B1d) DANGEROUS

Drive chain excessively loose (6.2.1d) DANGEROUS

Rear suspension bush has excessive free play Swinging arm pivot (2.4.A2a(i)) DANGEROUS

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Wheel alignment slightly misaligned. (2.5.1)

Front Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))