1989 Austin Maestro L

Exhaust noisy (8.1.1 (a))

Fuel Pipe/s corroded ()

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Outer Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Windscreen damaged but not adversely affecting driver's view wiper marks (3.2 (a) (i))

Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Windscreen damaged but not adversely affecting driver's view wiper marks (3.2 (a) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Fuel filler neck corroded.

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Axle mount (5.3.6 (a) (i))

Fuel filler neck corroded.

Exhaust corroded

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust corroded

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Exhaust corroded

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

offside and nearside rear wheel arches taped up

Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

offside and nearside rear wheel arches taped up

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

rear wheel arches taped up

Nearside Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

rear wheel arches corroded sharp edges covered with tape

Offside Front Tyre worn close to the legal limit (4.1.E.1)

nearside rear wheel arch covered by tape

offside rear wheel arch covered by tape

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear brake binding (3.7.B.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

nearside rear wheel arch covered by tape

offside rear wheel arch covered by tape

Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside rear wheel arch slight corrosion

Offside rear wheel arch slight corrosion

Oil leak

Nearside Outer Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear brake binding (3.7.B.1)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Engine/gearbox mounting(s) defective

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Engine/gearbox mounting(s) defective