1990 Rover Mini

Nearside Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced floor to bulkhead filler has been used (6.1.1 (c) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Suspension bellows damaged but not to excess (5.3.5 (b) (i))

Offside Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced floor to bulkhead filler has been used (6.1.1 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Suspension bellows damaged but not to excess (5.3.5 (b) (i))

Offside Rear bumper mounting rotted away

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Headlamp aim unable to be tested (4.1.2 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Direction indicator adversely affected by the operation of another lamp when side lights are on (4.4.3 (b))

Rear fog lamp not working (4.5.1 (a) (ii))

Rear fog lamp switch inoperative (4.5.3 (a))

Nearside Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced floor to bulkhead filler has been used (6.1.1 (c) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Suspension bellows damaged but not to excess (5.3.5 (b) (i))

Offside Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced floor to bulkhead filler has been used (6.1.1 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Suspension bellows damaged but not to excess (5.3.5 (b) (i))

Offside Rear bumper mounting rotted away

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front inner wheel arch to floor evidence of filler

Offside Front inner wheel arch to floor evidence of filler

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front inner wheel arch to floor evidence of filler

Offside Front inner wheel arch to floor evidence of filler

Tyre slightly damaged/cracking or perishing both rear tyre were made week 20 of year 2008 (5.2.3 (d) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Inner Wheel Arch To Floor Body Filler Is Evident

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Shock absorbers has negligible damping effect Excessive Uplift (5.3.2 (d))

Offside Front Shock absorbers has negligible damping effect Excessive Up LIft (5.3.2 (d))

Rear Registration plate inscription illegible Non Reflective (0.1 (b))

Rear fog lamp not working (4.5.1 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened Inner Face (1.1.14 (a) (ii))

Nearside Front Inner Wheel Arch To Floor Body Filler Is Evident

Nearside Rear Tyre obviously under inflated (5.2.3 (l))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened Inner Face (1.1.14 (a) (ii))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front in wheel arch to floor body filler is evadent

Oil leak, but not excessive (8.4.1 (a) (i))

Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps (4.1.3 (b))

Offside Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor by jacking point (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front in wheel arch to floor body filler is evadent

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Horn not working (7.7 (a) (ii))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Clutch Pedal Rubber Missing

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Front Exhaust has a minor leak of exhaust gases joint (7.1.2)

Nearside Front Passenger seat(s) missing at time of test ()

Nearside Front seatbelt insecure

Offside Front wheel bearing has slight play (2.5.A.3c)

clutch pedal rubber missing

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Horn not working (1.6.2a)

Nearside Front Sub-frame attachment bracket/mounting insecure (2.4.G.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Seat belt insecurely fixed to the vehicles structure (5.2.1a)

Offside Front Sub-frame attachment bracket/mounting insecure (2.4.G.1)

Offside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt inner (2.4.G.2)

Offside Rear position lamp(s) not working (1.1.A.3b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Exhaust has a minor leak of exhaust gases joint (7.1.2)

Nearside Front Passenger seat(s) missing at time of test ()

Nearside Front seatbelt insecure

Offside Front wheel bearing has slight play (2.5.A.3c)

clutch pedal rubber missing

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Seat belt damaged but webbing not significantly weakened (5.2.2a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

drivers door lower section corroding

o/s/r valance/corner corroded

Nearside Rear Shock absorber casing corroded externally so the unit does not function (2.7.2a)

Offside Rear Shock absorber casing corroded externally so the unit does not function (2.7.2a)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Seat belt damaged but webbing not significantly weakened (5.2.2a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

drivers door lower section corroding

o/s/r valance/corner corroded

BOTH FRONT BRAKE CALIPERS IN A VERY CORRODED STATE

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Centre Brake pipe slightly corroded (3.6.B.2c)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

SILLS AND ASSOCIATED AREAS WOULD BENEFIT FROM SOME PREVENTIVE MAINTENANCE

Brakes imbalanced across an axle (3.7.B.5b)

Offside Steering rack gaiter split (2.2.D.2d)

Offside front brake binding (3.7.B.1)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear Exhaust system not adequately supported (7.1.1)

Centre Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

Centre Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

lubricated clutch actuating pivot points/grease nipple areas on suspension corroded or dry

Nearside Front Upper Tie bar/rod rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Lower Tie bar/rod rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Inner Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Offside Outer Front Lower Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

o/s/f floor pan/jacking point has slight corrosion

poor running suggest service items and engine adjustments

Centre Exhaust system not adequately supported (7.1.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Front Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Rear Sub-frame corroded and seriously weakened (2.4.G.1)

corrosion/small rust hole on o/s front jacking point area.

n/s front & rear tyres worn low on edges.

o/s front tyre pressure was low.

Centre Exhaust system not adequately supported (7.1.1)

Offside Front Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Windscreen wiper blade deteriorated (8.2.2)

rear subframe corroded.