1989 Fiat Panda

Brake pedal anti-slip provision worn smooth (3.3.A.1b)

Nearside Front Body has a sharp edge caused by corrosion (6.1.C.1)

Nearside Rear Trailing arm attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Trailing arm attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)

Offside Seat belt anchorage prescribed area is inadequately repaired (5.2.6)

Offside Stop lamp not working (1.2.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Offside Rear Shock absorber has a slightly worn bush (2.7.4)

Offside Shock absorber has slight external damage to the casing (2.7.2a)

clutch pedal rubber missing

Offside Front Tyre worn close to the legal limit (4.1.E.1)

both rear lenses cracked

o/s/f tyre tread has deep cut in tread pattern

vechicle generally very rusty underneath

Fuel cap/sealing device sealing washer missing (7.2.4c)

Nearside Front Headlamp aim too low (1.8)

Nearside Front Side repeater not working (1.4.A.2c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

both rear lenses cracked

o/s/f tyre tread has deep cut in tread pattern

vechicle generally very rusty underneath

Nearside Headlamp aim too low (1.8)

Centre Exhaust system not adequately supported (7.1.1)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Horn not working (1.6.2a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear fog lamp not working (1.3.2b)

Exhaust has a major leak of exhaust gases (7.1.2)

Horn not working (1.6.2a)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

CHIP TO N/S HEADLAMP GLASS . CRACK TO O/S HEADLAMP GLASS / SURFACE CORROSION TO O/S/F FLOORING

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust system not adequately supported (7.1.1)

Front registration plate character(s) laid out in an incorrect format (6.3.4f)

Nearside Rear Registration plate lamp not working (1.1.5c)

Nearside front brake binding (3.7.B.1)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Offside Front Tyre worn close to the legal limit (4.1.E.1)

both lower suspension arms inner bushes splitting

both rear suspension arms front + rear bushes worn

n/s/f inner wheel rim damaged

rear exhaust mts splitting

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Seat belt locking mechanism does not secure or release (5.2.5a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

both lower suspension arms inner bushes splitting

both rear suspension arms front + rear bushes worn

n/s/f inner wheel rim damaged

rear exhaust mts splitting

Brake pedal anti-slip provision worn smooth (3.3.A.1b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Exhaust engine idle speed too high (7.3.A.2a)

Horn not working (1.6.2a)

Nearside Rear Direction indicator not working (1.4.A.2c)

Nearside Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Nearside Rear Shock absorber has an excessively worn bush (2.7.4)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Rear Shock absorber has an excessively worn bush (2.7.4)

Offside Rear fog lamp not working (1.3.2b)