1990 Toyota MR2

Fluid leak, but not excessive Coolant (8.4.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 2mm tread (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 3mm tread (5.2.3 (e))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive Engine (8.4.1 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Fluid leak, but not excessive Coolant (8.4.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge 2mm tread (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 3mm tread (5.2.3 (e))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive Engine (8.4.1 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill (6.2.2 (d) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Items removed from driver's view prior to test ()

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Items removed from driver's view prior to test ()

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Fluid leak, but not excessive rad wet with coolant (8.4.1 (a) (i))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement + rear (5.3.4 (a) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wheel arch (6.2.2 (d) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wheel arch (6.2.2 (d) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Outer Tyre has a cut in excess of the requirements deep enough to reach the ply or cords sidewall (5.2.3 (d) (i))

Offside Rear Outer Tyre has a cut in excess of the requirements deep enough to reach the ply or cords sidewall (5.2.3 (d) (i))

Fluid leak, but not excessive rad wet with coolant (8.4.1 (a) (i))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement + rear (5.3.4 (a) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wheel arch (6.2.2 (d) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wheel arch (6.2.2 (d) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Coolant leak ()

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

covers fitted to undersie

Emissions not tested (7.3.A.1)

Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded wheel arch (5.2.6)

Nearside Rear Suspension component mounting prescribed area is excessively corroded floor area (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded floor area (2.4.A.3)

Coolant leak ()

covers fitted to undersie

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Coolant leak

Steering system slightly tight (2.2.D.1)

Nearside rear brake binding (3.7.B.1)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear brake binding (3.7.B.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS

Nail in nearside rear tyre

Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front suspension retaining device missing (2.5.A.4)

Nearside Rear Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Lower Suspension arm has slight play in a ball joint (2.4.G.2)

nearside front tyre has slight damage to its inner sidewall

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

O/S/R has slight damage to sidewall

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

O/S/R has slight damage to sidewall

Offside Rear Road wheel slightly damaged (4.2.A.1a)

Offside Rear Suspension arm has slight play in a ball joint (2.4.G.2)

Slight cut in o/s/r tyre sidewall not exposing cord

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Road wheel slightly damaged (4.2.A.1a)

Offside Rear Suspension arm has slight play in a ball joint (2.4.G.2)

Slight cut in o/s/r tyre sidewall not exposing cord

Nearside Front Shock absorber has negligible damping effect (2.7.5)

Offside Front Macpherson strut upper support bearing is rough in operation (2.5.B.1b)

Offside Front Shock absorber has negligible damping effect (2.7.5)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside front brake application uneven (3.7.B.2)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear brake caliper has restricted free movement (3.5.1k)