MOT Status
ExpiredMileage
143,315 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Subframe mounting prescribed area is excessively corroded inner and outter sill (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded floor (2.4.A.3)
Power steering pump leaking from a failed component (2.3.3b)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Plastic sill covers fitted obsecuring panels
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Engine covers fitted obscuring some components in the engine bay
Oil leak
Under-trays fitted obscuring some underside components
underside of vehicle heavily undersealed
Hazard warning switch faulty (1.4.B.1d)
Nearside Front Headlamp aim too high (1.8)
Rear Registration plate lamp not working (1.1.C.1d)
Battery insecure
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake efficency 16%
Parking brake lever has little reserve travel (3.1.6b)
Plastic covers fitted to outer sills at time of test
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)
Headlamp aim too low (1.8)
An item not tested (Manual)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen washer provides insufficient washer liquid (8.2.3)
Battery insecure
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake lever has little reserve travel (3.1.6b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Plastic covers fitted to outer sills at time of test
Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)
engine light on
Front Brake pad(s) wearing thin (3.5.1g)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside Front position lamp(s) not in good working order (function impaired) (1.1.4a)
Offside Front position lamp(s) not in good working order (function impaired) (1.1.4a)
Front Brake pad(s) wearing thin (3.5.1g)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
engine light on
Oil leak
Rear Lower Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
advise slight rougness n/s/f wheel bearing
advise tape over n/s/r wheel arc
sill copvers fitted
off side wheel arch rusty b/d
rear brake discs rusty b/d
Brake master cylinder fluid level below minimum level (3.6.G.1e)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Stop lamp not working (1.2.1b)
Nearside Windscreen wiper blade insecure (8.2.2)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Power steering component(s) leaking (2.3.3b)
Offside Headlamp aim too low (1.8)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Stop lamp not working (1.2.1b)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
engine oil leak
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Vauxhall Cavalier?
Based on 791,158 MOT tests across 179,147 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
G232 CHJ is a 1990 Vauxhall Cavalier in White with a 1,998cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 53.3%.
Across all 1990 Vauxhall Cavalier models, the average MOT pass rate is 61.0% with a typical mileage of 108,026 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Vauxhall Cavalier fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 63,789 recorded failures. If you're considering buying G232 CHJ, it's worth having these areas checked by a mechanic before committing.
The Vauxhall Cavalier typically stays on UK roads for around 37 years. At 36 years old, this Vauxhall Cavalier is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of G232 CHJ?
You can check the full history of G232 CHJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was G232 CHJ registered?
G232 CHJ is a 1990 Vauxhall Cavalier, first registered on 31 December 1990.
Is G232 CHJ safe to buy?
The MOT history for G232 CHJ shows 15 tests with a 53.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does G232 CHJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on G232 CHJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.