1989 Austin Mini Racing Flame

Offside Windscreen wiper blade defective (3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Offside Windscreen wiper blade defective (3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i))

Rear Sub-frame corroded and seriously weakened several holes chalked (5.3.3 (b) (i))

Front Brake hose slightly deteriorated both cracking slightly (1.1.12 (b) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Tyre slightly damaged/cracking or perishing all 4 cracking (5.2.3 (d) (ii))

Windscreen wiper blade defective both starting to smear (3.4 (b) (i))

under side of vehicle has corrosion in places

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Oil leak, but not excessive Engine (8.4.1 (a) (i))

Tyre slightly damaged/cracking or perishing All 4 cracking (5.2.3 (d) (ii))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Oil leak, but not excessive Engine (8.4.1 (a) (i))

Tyre slightly damaged/cracking or perishing All 4 cracking (5.2.3 (d) (ii))

Oil leak, but not excessive engine area (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material all painted (1.1.11 (c))

Tyre slightly damaged/cracking or perishing all perishing (5.2.3 (d) (ii))

Rear Body has slight corrosion REAR BODY SIGHTLY CORROSION (6.1.B.2)

oil leaks

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Oil leak

Headlamp switch faulty (1.7.1)

Nearside Steering rack gaiter split (2.2.D.2d)

Nearside Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Oil leak

Brakes imbalanced across an axle (3.7.B.5b)

Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

rear brake application uneven (3.7.B.2)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Oil leak

Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Lower Shock absorber has an excessively worn bush (2.7.4)

Offside Headlamp aim too far to the right (1.8)

Offside Steering rack gaiter split (2.2.D.2d)

rear brake application uneven (3.7.B.2)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Horn not working (1.6.2a)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Slight corrosion appearing in siils and rear subframe

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Headlamp aim too low and too far to the left. (1.8)

Nearside Rear Shock absorber has negligible damping effect (2.7.5)

Offside Headlamp aim too far to the left (1.8)

Offside Rear Shock absorber has negligible damping effect (2.7.5)

Parking brake lever, pawl mechanism pivots or their associated mountings are insecure (3.1.4b)

Parking brake mechanism/associated mounting prescribed area is excessively corroded (3.1.9)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Front Exhaust system not adequately supported (7.1.1)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Front wheel bearing has excessive play (2.5.A.3c)

Offside Rear Shock absorber has negligible damping effect (2.7.5)