1990 Toyota MR2

Front Shock absorbers has light misting of oil offside and nearside (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component corroded but not seriously weakened underbody/suspension (5.3.3 (b) (i))

Front Coil spring corroded offside and nearside (5.3.1 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits 0.00 (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits 296ppm (8.2.1.2 (b))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits 0.88% (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits 0.77% (8.2.1.2 (b))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill panel (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Coolant leak ()

Front Coil spring corroded offside and nearside (5.3.1 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive crosmember (5.3.6 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill holed (5.3.6 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive crosmember (5.3.6 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Outer Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive to rear outer sill (5.3.6 (a) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Windscreen wiper blade defective (3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened all 4 (1.1.14 (a) (ii))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Suspension component corroded and seriously weakened outer sill panel (5.3.3 (b) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Brake disc worn, pitted or scored, but not seriously weakened all 4 (1.1.14 (a) (ii))

Items removed from driver's view prior to test ()

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

front crossmember and cover is corroded

reverse light is not working

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front tyre start cracking

Nearside Rear tyer start cracking

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear tyre start cracking

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cros member (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front tyre start cracking

Nearside Rear tyer start cracking

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear outer sill slight corrodded

Offside Rear tyre start cracking

Items removed from driver's view prior to test ()

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Items removed from driver's view prior to test ()

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside front brake binding (3.7.B.1)

Offside front brake binding (3.7.B.1)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Side repeater missing (1.4.A.2b)

Parking brake: efficiency below requirements (3.7.B.7)