1990 Rover Mini

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

noise from o/s/f wheel

Nearside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Steering rack gaiter split (2.2.D.2d)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Fuel hose insecure (7.2.1)

Hazard warning lamps inoperative (1.4.B.1b)

Hazard warning tell tale not working correctly (1.4.B.1e)

Headlamp switch faulty (1.7.1)

Horn not working (1.6.2a)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Rear Braking system leaking (3.6.A.1)

Nearside Rear Shock absorber insecure (2.7.2b)

Nearside Rear Statutory seat belt missing (5.1.1)

Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Nearside Rear position lamp(s) incorrect colour (1.1.A.3e)

Nearside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Nearside Stop lamp not working (1.2.1b)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Statutory seat belt missing (5.1.1)

Offside Rear position lamp(s) incorrect colour (1.1.A.3e)

Offside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Offside Stop lamp not working (1.2.1b)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Rear fog lamp not working (1.3.2b)

Rear fog lamp switch missing (1.3.1a)

Offside Rear Shock absorber insecure (2.7.2b) DANGEROUS

Offside Front Tyre worn close to the legal limit (4.1.E.1)

battery not checked jack etc in box on top

both sill panels covered by body kit

offside front tie bar nut not wound up to end of thread

grille missing

Nearside Front Lower Sub-frame has slight play in a ball joint (2.4.G.2)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Nearside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

Nearside Rear Upper Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Upper Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Lower Sub-frame has slight play in a ball joint (2.4.G.2)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear Radius arm has slight play in a pin bearing (2.4.G.2)

Offside Rear Upper Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Upper Vehicle structure has slight corrosion (6.1.B.2)

can not see inner sills due to body kit fitted