2011 Land Rover Discovery

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords inner sidewall (5.2.3 (d) (i))

Offside Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre slightly damaged inner sidewall (5.2.3 (d) (ii))

Nearside Rear inner and outer sill corroded not within 30cm or structure

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear inner and outer sill corroded not within 30cm or structure

Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear sill corroded not within 30cm of structure

Offside Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Offside Rear sill corroded not within 30cm of structure

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

prop bearing worn

suspension air compressor cover missing

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Prop shaft bearing excessively worn (6.1.7 (b) (i))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material along arm (1.1.11 (c))

Nearside Rear Inner Tyre has a cut but not deep enough to reach the ply or cords sidewall (5.2.3 (d) (i))

Nearside Rear brake pipe unions corroded

Offside Rear Brake pipe corroded, covered in grease or other material along arm (1.1.11 (c))

Offside Rear Suspension arm ball joint has slight play rear most radius arm inner ball joint (5.3.4 (a) (i))

Offside Rear brake pipe unions corroded

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Upper Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material along arm (1.1.11 (c))

Nearside Rear Inner Tyre has a cut but not deep enough to reach the ply or cords sidewall (5.2.3 (d) (i))

Nearside Rear brake pipe unions corroded

Offside Rear Brake pipe corroded, covered in grease or other material along arm (1.1.11 (c))

Offside Rear Suspension arm ball joint has slight play rear most radius arm inner ball joint (5.3.4 (a) (i))

Offside Rear brake pipe unions corroded

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)