1997 Toyota MR2

Emissions not tested due to major exhaust leak (7.3.A.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill back (6.1.B.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm showing cord (4.1.E.1)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)

Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill back (6.1.B.2)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

registration plate fitted to the front does not have black characters on a white background (6.3.2a)

registration plate fitted to the rear does not have black characters on a yellow background (6.3.2b)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Inner Tyre worn close to the legal limit (4.1.E.1)

Parking brake lever has little reserve travel (3.1.6b)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Vehicle structure has slight corrosion underneath in places (6.1.B.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Offside Front Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)

Offside Front Steering rack gaiter split (2.2.D.2d)

Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

registration plate fitted to the front does not have black characters on a white background (6.3.2a)

registration plate fitted to the rear does not have black characters on a yellow background (6.3.2b)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too low and too far to the left. (1.8)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Headlamp aim too low and too far to the right. (1.8)

Offside Inner Stop lamp not working (1.2.1b)

Offside Rear Mechanical brake component has restricted free movement (3.5.1k)

Parking brake lever has no reserve travel (3.1.6b)

Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Side repeater missing (1.4.A.2b)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Side repeater missing (1.4.A.2b)

registration plate with character(s) which are not the correct height (6.3.4a)