1990 Rover Mini

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

extensive welding to vehicle structure appeared ok at test

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Windscreen washer not working (3.5 (a))

Windscreen wiper not working (3.4 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Front Exhaust system not adequately supported Bracket Broken (7.1.1)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Hazard warning lamps inoperative (1.4.B.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Horn not working (1.6.2a)

Offside Stop lamp not working (1.2.1b)

Registration plate lamp not working (1.1.C.1d)

Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Direction indicators flashing less than 60 times a minute (1.4.A.2g)

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Steering rack gaiter split (2.2.D.2d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Tyre worn close to the legal limit (4.1.E.1)

Offside Rear fog lamp not working (1.3.2b)

Nearside Front Sub-frame attachment bracket/mounting bolt missing (2.4.G.1) DANGEROUS

Offside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Front registration plate insecure (6.3.1b)

Nearside Front Upper Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Headlamp aim beam image too far to the right (1.6.B4)

Nearside Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.B2)

Nearside Rear Radius arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Shock absorber has negligible damping effect (2.7.5)

Nearside front brake application uneven (3.7.B.2)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Rear fog lamp not working (1.3.2b)

Service brake: efficiency below requirements (3.7.B.7)

Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

nearside passenger door hinge insecure