1989 Honda CD250U

Chain guard missing ()

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Headlamp aim not tested (4.1.2 (b))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Position lamp switch does not operate in accordance with the requirements HI and LOW (4.2.2 (a))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) DANGEROUS

Chain guard missing ()

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

front brake pipe not secure, possible contact with front tyre

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort rear brake arm,at incorrect angle due to drive chain wear (3.3.A1c)

Stop lamp does not illuminate immediately a brake applies connecting spring missing ,between brake switch and brake pedal (1.3.1a)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Motorcycle structure slightly corroded (6.1.1a)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Exhaust slightly deteriorated (7.1.1a)

Registration plate margin less than the minimum requirement (6.3.4g)

Exhaust noisy (7.1.2)

Exhaust slightly deteriorated (7.1.1a)

Drive chain worn but not considered excessive (6.2.1e)

Drive chain excessively loose (6.2.1d)

Exhaust excessively deteriorated (7.1.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain worn but not considered excessive (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pedal has inadequate reserve travel (3.1.3b)

Rear Wheel spoke excessively bent (4.2.1b)

Front Brake disc(s) slightly worn (3.2.A1l)

Steering movement slightly 'notchy' (2.2.1b)