2002 Honda XR250

Offside Lower Slight oil leak

Registration plate does not conform to the specified requirements (0.1 (d))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Offside Lower Slight oil leak

Chain guard missing ()

Drive chain worn but not considered excessive (6.2.1e)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear suspension bearing has slight free play linkage bearings (2.4.A2a(i))

engine smoking

fuel tank rear mount loose

Brake lever attachment screws loose locknut missing (3.1.2b)

Handlebar handgrip not secure to handlebars. both (2.1.1c)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Chain guard missing ()

Drive chain worn but not considered excessive (6.2.1e)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear suspension bearing has slight free play linkage bearings (2.4.A2a(i))

engine smoking

fuel tank rear mount loose

Rear suspension bearing has slight free play Bottom shock bearing (2.4.A2a(i))

Direction indicator missing All indicators (1.5.1a)

Front Brake disc(s) cracked (3.2.A1g)

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Fuel cap sealing washer missing (7.2.2c)

Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Throttle operating incorrectly (6.2.1f)

Front Brake disc(s) has slight run out (3.2.A1m)

Rear suspension bearing has slight free play Bottom shock bearing (2.4.A2a(i))

Brake lever is bent but brake can still be readily applied (3.1.3c)

Drive chain slightly loose (6.2.1d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

General condition represents age of vehicle

Oil leak

Drive chain excessively loose (6.2.1d)

Horn not loud enough to be heard by another road user (1.7.3a)

Horn sounds harsh or grating (1.7.3c)

Stop lamp does not emit a steady light (1.3.1b)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

General condition represents age of vehicle

Front Tyre is unsuitable (4.1.1)

Front wheel bearings have excessive free play (2.3.5b)

Rear Brake pedal has inadequate reserve travel (3.1.3b)

Rear suspension bearing has excessive free play (2.4.A2a(i))

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)