1990 Land Rover Range Rover

Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake hose ferrule excessively corroded X2 (1.1.12 (f) (i))

Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Central Rear Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security All (6.2.2 (d) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Emissions not tested Due to fuel leak (8.2.1.2 (d))

Hazard warning switch inoperative (4.4.2 (a) (ii))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Fuel system component leaking excessively or a risk of fire (6.1.3 (b) (ii)) DANGEROUS

Brake pedal wearing smooth (1.1.2 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust has a minor leak of exhaust gases from a join (7.1.2)

Nearside Front Child Seat fitted not allowing full inspection of adult belt plus nearside rear ()

Parking brake lever has little reserve travel (3.1.6b)

both front wheel bearings have slight play

Nearside Rear passenger door cannot be opened from outside the vehicle (6.2.B.1c)

Exhaust has a minor leak of exhaust gases from a join (7.1.2)

Nearside Front Child Seat fitted not allowing full inspection of adult belt plus nearside rear ()

Parking brake lever has little reserve travel (3.1.6b)

both front wheel bearings have slight play

Parking brake lever has little reserve travel (3.1.6b)

Bonnet cannot be secured in the closed position (8.4.1)

Exhaust emissions carbon monoxide content excessive 4.46% (7.3.B.1a)

Exhaust has a major leak of exhaust gases from a join (7.1.2)

Offside Rear fog lamp not working (1.3.2b)

Windscreen wiper not operating automatically when switched on (8.2.1b)

Parking brake lever has little reserve travel (3.1.6b)

Bonnet cannot be secured in the closed position (8.4.1)

Exhaust has a major leak of exhaust gases from a join (7.1.2)

Nearside Front Brake pipe excessively corroded 2x brake pipes on brake caliper (3.6.B.2c)

Nearside Front Inner Suspension component mounting prescribed area is excessively corroded sill body mounting (2.4.A.3)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill body mounting (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

corrosion to body mounting areas nearside front offside front and offside rear

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Bonnet cannot be secured in the closed position (8.4.1)

Brake fluid warning lamp illuminated (3.6.G.2)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Trailing arm has excessive play in a pin/bush (2.4.G.2)

Offside Rear Trailing arm has excessive play in a pin/bush (2.4.G.2)

Registration plate lamp not working (1.1.C.1d)

Service brake juddering severely (3.7.C.2)

Vehicle Identification Number not permanently displayed (6.3.5.a)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

corrosion to body mounting areas nearside front offside front and offside rear

both front anti roll bar links worn and have play

both front hub seals leaking slightly

long travel at handbrake lever

n/s/f and o/s/f body at floor area corroded

n/s/f outer sill holed and corroded

n/s/r bump stop missing

n/s/r wheel bearing has slight play

o/s/r bump stop insecure

slight leak both front exhaust pipes

various oil leaks at engine area

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Battery insecure (1.9.1)

Brake performance not tested (3.7.A.1)

Front registration plate missing (6.3.1a)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Body has a sharp edge caused by damage (6.1.C.1)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe leaking (3.6.A.1)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Trailer electrical socket (13 pin) not operating the trailer lamps as intended (1.9.4)

Vehicle Identification Number not permanently displayed (6.3.5.a)

Steering column universal joint has slight play (2.1.5)

both front anti roll bar links worn and have play

both front hub seals leaking slightly

front brake pads low

long travel at handbrake lever

n/s/f and o/s/f body at floor area corroded

n/s/f outer sill holed and corroded

n/s/r bump stop missing

n/s/r wheel bearing has slight play

o/s/r bump stop insecure

slight leak both front exhaust pipes

various oil leaks at engine area

front plate fitted inside front screen

nsf metal brake pipe corroded will req to be monitored

osf metal bp corroded willreq to be monitored

Horn not working (1.6.2a)

Windscreen washer provides insufficient washer liquid (8.2.3)

front plate fitted inside front screen

nsf metal brake pipe corroded will req to be monitored

osf metal bp corroded willreq to be monitored

all metal brake pipes rusty and WILL need replaced before next mot

both front hubs seals leaking but not excessive and also not affecting brakes

exhaust has slight leaks at joints but not excessive

front discs rusty but not to excess

corrosion around lower door pillar at nsf not within 30 cm of structure mount

exhaust has slight blows at the joints not excessive

front to rear metal brake pipes corroded at time of test not excessive

slight oil leaks at front hub balls not leaking on to brakes etc at time of test

corrosion on brake pipes

corrosion on surface of discs

slight oil leak at front hubs

slight play nsr bearing

small chips on front screen not enough to fail mot requirements

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)