1990 Mazda MX-5

Offside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Rear surface rust appearing

Driver's view to the front outside the swept area of the windscreen wipers restricted by an obstruction (3.1 (a) (i))

Power steering pipe/hose has slight seepage (2.1.5 (a))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

corrosion starting under vehicle

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Exhaust system insecure (6.1.2 (a))

Front Position lamp not working side lamps (4.2.1 (a) (ii))

Nearside Front Headlamp aim too low (4.1.2 (a))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner lower arch inner sill area (5.3.6 (a) (i))

Position lamp switch does not illuminate the front and rear position lamps with a single operation (4.2.2 (a))

Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))

Driver's view to the front outside the swept area of the windscreen wipers restricted by an obstruction (3.1 (a) (i))

Power steering pipe/hose has slight seepage (2.1.5 (a))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

corrosion starting under and around vehicle

Driver's view Items removed from driver's view prior to test (3.1 (a) (ii))

Driver's view to the front outside the swept area of the windscreen wipers restricted by an obstruction (3.1 (a) (i))

Front Registration plate insecure but not likely to fall off (0.1 (a))

Front Upper Suspension arm ball joint dust cover severely deteriorated both (5.3.4 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Obligatory mirror slightly loose (3.3 (b) (i))

Offside Rear Vehicle structure is deformed but structural rigidity is not significantly reduced Chassis leg (6.1.1 (a) (i))

Vehicle under body and suspension components have some surface corrosion

Offside Rear Vehicle structure is deformed but structural rigidity is not significantly reduced Chassis leg (6.1.1 (a) (i))

Vehicle under body and suspension components have some surface corrosion

Rear fog lamp missing (4.5.1 (a) (ii))

Offside Rear Vehicle structure is deformed but structural rigidity is not significantly reduced Chassis leg (6.1.1 (a) (i))

Vehicle under body and suspension components have some surface corrosion

Offside Vehicle structure is deformed but structural rigidity is not significantly reduced Chassis leg at rear (6.1.1 (a) (i))

Vehicle under body and suspension components have some surface corrosion

Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg at front (6.1.1 (c) (i))

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure Inner sidewall (5.2.3 (d) (ii)) DANGEROUS

Offside Vehicle structure is deformed but structural rigidity is not significantly reduced Chassis leg at rear (6.1.1 (a) (i))

Vehicle under body and suspension components have some surface corrosion

Central Exhaust has a minor leak of exhaust gases joint (6.1.2 (a))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Nail in tyre ()

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear fog lamp not working (1.3.2b)

Nearside Rear Shock absorber has negligible damping effect (2.7.5)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)