1990 Renault Master

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Brake hose slightly deteriorated all (1.1.12 (b) (ii))

Exhaust mounting defective (6.1.2 (a))

Headlamp lens slightly defective left and right sides (4.1.1 (b) (i))

Position lamp has a product on the lens or light source but not adversely affecting light intensity both sides (4.2.3 (b) (ii))

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive all parts of (5.3.6 (a) (i))

Welding is poor

rear brake back plates rusted

Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Brake hose slightly deteriorated all (1.1.12 (b) (ii))

Exhaust mounting defective (6.1.2 (a))

Headlamp lens slightly defective left and right sides (4.1.1 (b) (i))

Position lamp has a product on the lens or light source but not adversely affecting light intensity both sides (4.2.3 (b) (ii))

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive all parts of (5.3.6 (a) (i))

rear brake back plates rusted

All welding poor

Brake hose slightly deteriorated All (1.1.12 (b) (ii))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Brake hose slightly deteriorated All (1.1.12 (b) (ii))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Outer driveshaft gaiter leaking grease

Offside Front Outer Drive shaft gaiter leaking grease

Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement Front bush (5.3.4 (a) (i))

Nearside front sill corrosion

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

nearside rear inner wheel arched

Brake pipe slightly corroded (3.6.B.2c)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Oil leak

Registration plate lamp not working (1.1.C.1d)

Slight play in offside front wheel bearing.

Small chips in screen

Brake pipe slightly corroded (3.6.B.2c)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Slight play in offside front wheel bearing.

Small chips in screen

Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

front exhaust mount slightly loose and rear mount split

slight blow on mid exaust

slight play in off side hub and slightly noisey

Brake pedal has insufficient reserve movement (3.3.A.5) DANGEROUS

Parking brake: efficiency below requirements (3.7.B.7)

Rear Registration plate lamp not working (1.1.C.1d)

Service brake: efficiency below requirements (3.7.B.7)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

rear brake application uneven (3.7.B.2)

Brake pedal spongy (3.3.B.1b) DANGEROUS

Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

brake fluid apon min mark

front exhaust mount slightly loose and rear mount split

slight blow on mid exaust

slight play in off side hub and slightly noisey

Centre Exhaust system not adequately supported (7.1.1)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Windscreen wiper not operating over a large enough area to give an adequate view (8.2.1c)

Offside Inner Track rod end ball joint has slight play (2.2.B.1f)

Offside Windscreen wiper not operating over a large enough area to give an adequate view (8.2.1c)

Oil leak

Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Inner Track rod end ball joint has slight play (2.2.B.1f)

Oil leak

Front Exhaust system not adequately supported (7.1.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Noise in offside front wheel bearing

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front wheel bearing has slight play (2.5.A.3c)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust mounting missing (7.1.1b)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

all tyres perishing

slight brake bind on n/s/r

Brake pipe slightly corroded (3.6.B.2c)

Front wheel bearing has slight play (2.5.A.3c)

Nearside Outer Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Brake pipe slightly corroded (3.6.B.2c)

Front wheel bearing has slight play (2.5.A.3c)

Nearside Outer Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Registration plate lamp not working (1.1.5c)

Stop lamp not working (1.2.1b)