1990 Rover Mini

Front Windscreen washer not working (3.5 (a))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Rear fog lamp does not emit a steady red light (4.5.4 (a))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

both front sub frame bushes started to split

corrosion not through all skins rear floor pans

slight play in n/s/r radius arm

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Body component damaged and likely to cause injury spot light lense (6.2.1 (a) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

both front sub frame bushes started to split

corrosion not through all skins rear floor pans

slight play in n/s/r radius arm

Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear fog lamp does not emit a steady red light (4.5.4 (a))

Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wheel arch in 2 places (5.3.6 (a) (ii)) DANGEROUS

Nearside Rear Outer sill corroded

nearside mirror missing

new rear subframe fitted

slight free play at steering wheel noted

Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Rear Sub-frame corroded and seriously weakened two places (chalked) (2.4.G.1)

Offside Rear Subframe mounting prescribed area is excessively corroded outer sill to floor (chalked) (2.4.A.3)

Nearside Front subframe bush starting to seperate

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Nearside Rear outer sill

blue smoke noted during fast idle

free play at steering wheel noted

nearside mirror glass missing

oil leak noted

rear subframe has had weld repair plates

both front tyres bald on inner edge + close to limit

c.o. close to limit

slight exhaust leak front pipe

slight play in n/s/f lower ball joint

slight play in o/s/r radius arm

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear Radius arm has excessive play in a pin/bush (2.4.G.2)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Front Sub-frame cracked (2.4.G.1) DANGEROUS

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

both front tyres bald on inner edge + close to limit

slight exhaust leak front pipe

slight play in n/s/f lower ball joint

SUBFRAME WELDED

Brakes imbalanced across an axle (3.7.B.5b)

Hazard warning switch faulty (1.4.B.1d)

Offside Steering rack gaiter split (2.2.D.2d)

Offside rear brake recording little or no effort (3.7.B.5a)

SUBFRAME WELDED

Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Subframe has been welded excessively

Nearside Rear Rear wheel bearing has excessive play (2.6.2)

Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)

Outer Front Body has slight corrosion (6.1.B.2)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Inner Front Upper Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Lower Shock absorber has an excessively worn bush (2.7.4)

Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Radius arm has slight play in a pin/bush (2.4.G.2)

Outer Front Body has slight corrosion (6.1.B.2)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Horn not working (1.6.2a)

Offside Rear fog lamp missing (1.3.2a)

Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Steering column shaft has excessive end float (2.1.3)

Nearside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)

Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)

Brake pedal does not operate a brake fitted to each wheel (3.3.A.3)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Offside Rear Braking system leaking (3.6.A.1)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Rear Rear wheel bearing (2.6.1)