1990 Toyota MR2

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced Near suspension arm (6.1.1 (c) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Horn sound not in accordance with requirements (7.7 (c))

Nearside Front Steering locking device missing track rod end split pin missing (2.1.3 (d))

Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill to floor marked yellow (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to suspension arm marked yellow (5.3.6 (a) (i))

Offside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

clutch hydraulic hose twisted

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))

Nearside Front Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Nearside Front Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Offside Rear parking brake low

Rear Anti-roll bar linkage synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

slight oil leak on engine

Parking brake: efficiency below requirements (3.7.B.7)

parking brake travel close to excesive

Offside Front Lower Body has slight corrosion (6.1.B.2)

Nearside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Shock absorber has negligible damping effect (2.7.5)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Inner Front Body has slight corrosion (6.1.B.2)