1990 Citroen Ax

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))

Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Outer Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Headlamp aim not tested (4.1.2 (b))

Nearside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Upper Macpherson strut pin or bush excessively worn top mount (5.3.4 (a) (i))

Offside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear floor slightly cooroded

Offside Front floor and inner sill slightly corroded

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Rear floor slightly cooroded

Offside Front floor and inner sill slightly corroded

Brake valve leaking load sensing valve (1.1.7 (d) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Brake hydraulic reservoir fluid level below minimum level (1.1.10 (d) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material valve to flexi hose (1.1.11 (c))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive inner sill/floor (7.1.1 (a) (i))

Offside corrosion on front sill but not in a prescribed area

Offside Rear Brake pipe corroded, covered in grease or other material across axle (1.1.11 (c))

slight corrosion on rear floor

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake pipe slightly corroded across axle (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

both front inner wings corroded

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded sill end (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake pipe slightly corroded across axle (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

both front inner wings corroded

Offside Rear Brake pipe slightly corroded across axle onto flexi (3.6.B.2c)

Rear Body has slight corrosion (6.1.B.2)

front inner wings corroded

Nearside Side repeater not working (1.4.A.2c)

Offside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear Brake pipe slightly corroded across axle onto flexi (3.6.B.2c)

Rear Body has slight corrosion (6.1.B.2)

front inner wings corroded

Body has slight corrosion (6.1.B.2)

Offside Rear Brake pipe slightly corroded across axle (3.6.B.2c)

Corrosion to nearside front inner wheel arch

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Body has slight corrosion (6.1.B.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Front Body has slight corrosion (6.1.B.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Offside Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)

Front to rear brake pipes have slight corrosion

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Slight rear light interference

front to rear brake pipes starting to corode

hand brake operation feels poor

nsf & osf inner wings coroded & holed

os track rod end boot split

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pipe slightly corroded (3.6.B.2c)