1990 Yamaha FZR600

Drive chain slightly tight (6.1.7 (k) (i))

Exhaust noisy (8.1.1 (a))

Front Brake binding but not excessively (1.2.1 (f))

Front Valve stem seriously damaged (5.2.3 (j)) DANGEROUS

Drive chain slightly tight (6.1.7 (k) (i))

Exhaust noisy (8.1.1 (a))

Front Brake binding but not excessively (1.2.1 (f))

Front shock absorber has light misting of stanchion slight seal leak on r/h fork leg (2.3.3)

Fairings insecure but not likely to impede the steering tank cover loose (2.1.2e)

Headlamp switch faulty light switch has a delay or does not make lamp work immediately (1.2.4)

Fairings insecure but not likely to impede the steering tank cover loose (2.1.2e)

Tyre valve stem slightly misaligned rear valve leaking (4.1.2c)

Drive chain slightly tight (6.2.1d)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear Brake disc(s) cracked (3.2.A1g) DANGEROUS

Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front suspension has a slightly reduced damping effect (2.3.6c)

Exhaust noisy (7.1.2)

Rear Brake disc(s) slightly worn (3.2.A1l)

Exhaust markings indicating not for road use or similar wording (7.1.4)

Nearside Front Footrest insecure (6.2.1a)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear reflector on motorcycle missing (1.4.1)

Rear Brake disc(s) slightly worn (3.2.A1l)

Front Brake lever has inadequate reserve travel (3.1.3b)

Front Roller brake test indicates a binding brake (3.3.A1a)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Steering movement excessively stiff with the wheel raised (2.2.1b)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front wheel bearings have excessive free play (2.3.5b)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))