MOT Status
ValidMileage
34,700 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Upper Suspension component ball joint has slight play (5.3.4 (a) (i))
Offside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Horn not working (7.7 (a))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Nearside Front Upper Suspension component ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
boot floor corroded
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded bulk head and a/post (1.1.21 (e) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Upper Suspension component ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
boot floor corroded
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker (5.3.6 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Rear fog lamp tell-tale not working (4.9.1 (a) (ii))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre obviously under inflated (5.2.3 (l))
Oil leak, but not excessive (8.4.1 (a) (i))
Hazard warning switch inoperative (4.4.2 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Sub-frame fractured (5.3.3 (b) (ii)) DANGEROUS
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement radius (5.3.4 (a) (i))
Offside Direction indicator flashing less than 60 times a minute (4.4.4 (a))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x2 places (5.3.6 (a) (i))
Nearside Front Upper Suspension component ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear x2 places (5.3.6 (a) (i))
Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x2 places (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear x2 places (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Windscreen washer not working (3.5 (a))
Offside Front Inner Brake master cylinder/servo mounting prescribed area is excessively corroded flitch / inner wing (1.1.21 (e) (i))
Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill / inner arch (6.1.B.2)
Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill / inner arch (6.1.B.2)
Offside Front wheel bearing has excessive play (2.5.A.3c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Sub-frame corroded and seriously weakened (2.4.G.1)
Nearside Outer Front Body has slight corrosion (6.1.B.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Outer Rear Body has slight corrosion (6.1.B.2)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Offside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Outer Rear Body has slight corrosion (6.1.B.2)
Direction indicators flashing less than 60 times a minute (1.4.A.2g)
Nearside Outer Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
spare wheel well corroded
Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)
Nearside Tie bar/rod severely distorted (2.4.G.1)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
spare wheel well corroded
exhaust mounting splitting
offside sill top corroding
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
exhaust mounting splitting
offside sill top corroding
Offside front door step corroding
Offside rear outer sill corroded
Front registration plate insecure (6.3.1b)
Nearside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Direction indicators flashing less than 60 times a minute (1.4.A.2g)
Nearside Rear Shock absorber has negligible damping effect (2.7.5)
Nearside Upper Ball joint has excessive play (2.2.B.1f)
Offside Headlamp aim too high (1.8)
Offside Rear Shock absorber has negligible damping effect (2.7.5)
Fuel pipe/s corroded
Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.D.4)
Nearside Rear Body has slight corrosion (6.1.B.2)
Nearside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.D.4)
Oil leak
How Reliable is the Austin Mini Thirty?
Based on 12,035 MOT tests across 1,043 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
G501 RHA is a 1990 Austin Mini Thirty in Red with a 998cc petrol engine. This vehicle has been through 36 MOT tests with a personal pass rate of 55.6%.
Across all 1990 Austin Mini Thirty models, the average MOT pass rate is 66.5% with a typical mileage of 60,240 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Austin Mini Thirty fails its MOT is steering rack gaiter split, accounting for 846 recorded failures. If you're considering buying G501 RHA, it's worth having these areas checked by a mechanic before committing.
The Austin Mini Thirty typically stays on UK roads for around 37 years. At 36 years old, this Austin Mini Thirty is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of G501 RHA?
You can check the full history of G501 RHA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was G501 RHA registered?
G501 RHA is a 1990 Austin Mini Thirty, first registered on 22 January 1990.
Is G501 RHA safe to buy?
The MOT history for G501 RHA shows 36 tests with a 55.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does G501 RHA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on G501 RHA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.