1989 Austin Mini Racing Flame

heavy underside corrosion but ok at time of test

Brake performance unable to be tested due to front brakes binding that bad (1.2.1 (g))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Steering wheel has excessive movement up and down (2.2.2 (a))

Suspension arm ball joint excessively worn all four upper and lower (5.3.4 (a) (i))

surface corrosion to underside of vehicle

Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

under body has surface corrosion

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Front Seat belt not functioning as intended (7.1.2 (c))

Rear Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Upper Suspension arm ball joint has slight play both sides (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Brake pedal not releasing correctly and functionality of brakes affected brake pedal sticking (1.1.2 (b) (ii))

Nearside Front Upper Suspension arm pin or bush excessively worn arm excessive movement when rotated & radius plate test (5.3.4 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Front Oil leak ()

Hazard warning lamps inoperative (1.4.B.1b)

Nearside Front Mechanical brake component has restricted free movement (3.5.1k)

Nearside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear sub frame (6.1.B.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bulk haed (6.1.B.2)

Offside Front Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)

Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings shock absorber mounting (6.1.B.2)

Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch (6.1.B.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear sub frame (6.1.B.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Body has slight corrosion all under body corroded (6.1.B.2)

Front Oil leak ()

Front Steering rack gaiter split (2.2.D.2d)

Front engine mounting deteriorated resulting in excessive movement (6.1.D.1a)

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Front Front wheel bearing has excessive play (2.5.A.3c)

Offside Front Upper Ball joint has excessive play (2.2.B.1f)

Rear Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)

Rear Registration plate lamp not working (1.1.C.1d)

Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Indicator switch insecure (1.4.A.1)

Main beam 'tell-tale' not working (1.7.4c)

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Front Shock absorber has an excessively worn bush (2.7.4)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Headlamp aim too low (1.8)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Offside Headlamp aim too high (1.8)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Steering column top bearing slightly worn (2.1.2c)

general rusting on underside of vehicle