MOT Status
ExpiredMileage
90,728 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Direction indicators not working (1.4.A.2c)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Hazard warning lamps inoperative (1.4.B.1b)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too low (1.8)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is inadequately repaired (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim too low (1.8)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is inadequately repaired (2.4.A.3)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Seat belt stitching slightly frayed (5.2.2b)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Parking brake lever has little reserve travel (3.1.6b)
n/s/f floor / sill holed but outside all prescribed areas
n/s/f inner arch corroded and holed but outside all prescribed areas
o/s/f inner arch slightly corroded
o/s/f outer sill holed but outside all prescribed areas
N/S/F floor and inner wheel arch corroded
head lights poor
oil leak
pin hole O/S/F outer drive shaft boot
Battery insecure (1.9.1)
Electrical wiring damaged and bare wires exposed (1.9.2c)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
N/S/F floor and inner wheel arch corroded
head lights poor
oil leak
pin hole O/S/F outer drive shaft boot
Horn not working (1.6.2a)
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Outer Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Rear Sub-frame corroded and seriously weakened (2.4.G.1)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake lever has little reserve travel (3.1.6b)
Steering column top bearing slightly worn (2.1.2c)
front inner wings holed and corroed
front vallance holed and corroded
rear inner wheel archs corroded
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
front valance corroded
general corrosion on susp mounts
All position lamps not working (1.1.A.3b)
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Sub-frame corroded and seriously weakened (2.4.G.1)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)
front valance corroded
Front Direction indicators slightly discoloured (1.4.A.2f)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Steering column top bearing slightly worn (2.1.2c)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Front Direction indicators slightly discoloured (1.4.A.2f)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Steering column top bearing slightly worn (2.1.2c)
Nearside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
osf floor corroded
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
osf floor corroded
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front constant velocity joint gaiter split (2.5.C.1a)
rear brake application uneven (3.7.B.2)
Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Seat belt anchorage prescribed area is inadequately repaired (5.2.6)
Steering rack insecure (2.2.B.1a)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
osr tyre perrished
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Rear Seat belt stitching slightly frayed (5.2.2b)
Seat belt damaged but not affecting the operation of the belt (5.2.2a)
nsf tyre perrished
Rear Seat belt stitching slightly frayed (5.2.2b)
Seat belt damaged but not affecting the operation of the belt (5.2.2a)
nsf tyre perrished
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is inadequately repaired (2.4.A.3)
N/S and O/S outer sills in rusty condion †
O/S floor rusty at the front
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
How Reliable is the Rover Mini?
Based on 519,169 MOT tests across 45,631 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
G519 VTA is a 1990 Rover Mini in Black with a 998cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 41.2%.
Across all 1990 Rover Mini models, the average MOT pass rate is 65.0% with a typical mileage of 55,299 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Rover Mini fails its MOT is subframe mounting prescribed area is excessively corroded, accounting for 32,036 recorded failures. If you're considering buying G519 VTA, it's worth having these areas checked by a mechanic before committing.
The Rover Mini typically stays on UK roads for around 47 years. At 36 years old, this Rover Mini is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of G519 VTA?
You can check the full history of G519 VTA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was G519 VTA registered?
G519 VTA is a 1990 Rover Mini, first registered on 8 May 1990.
Is G519 VTA safe to buy?
The MOT history for G519 VTA shows 17 tests with a 41.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does G519 VTA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on G519 VTA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.