1990 Honda CBR1000F

Front Brake binding but not excessively (1.2.1 (f))

Front Brake excessively binding (1.2.1 (f))

Headlamp aim too low (4.1.2 (a))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Front Brake binding but not excessively (1.2.1 (f))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake binding but not excessively (1.2.1 (f))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake disc(s) slightly worn (3.2.A1l)

Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Non-standard exhaust fitted but not excessively loud

Drive chain worn to excess (6.2.1e)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front wheel bearings have excessive free play (2.3.5b)

Nearside Front Direction indicator insecure (1.5.3b)

Rear wheel bearings have excessive free play (2.4.A.2c)

Registration plate margin less than the minimum requirement (6.3.4g)

Front Roller brake test indicates a binding brake (3.3.A1a) DANGEROUS

Non-standard exhaust fitted but not excessively loud

Tyre pressures low

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Roller brake test indicates a binding brake (3.3.A1a)

Headlamp aim too high (1.6)

Rear tyre underinflated

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Drive chain slightly loose (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))