1990 Mazda MX-5

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

O/S a post corroded

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

vehicle has had extensive welding repairs carried out and is covered in thick underseal.

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor area (7.1.1 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

O/S a post corroded

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

vehicle has had extensive welding repairs carried out and is covered in thick underseal.

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

underside of vehicle has had extensive welding repairs carried out and is covered in a thick layer of underseal.

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Wing not welded at bottom.

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Position lamp not working (4.2.1 (a) (ii))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i))

Seat belt anchorage prescribed area is inadequately repaired both sides been filled not welded (7.1.1 (a) (i))

Suspension component mounting prescribed area is inadequately repaired all areas of corrosion had plates stuck on with filler (5.3.6 (a) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Suspension component corroded but not seriously weakened all components corroded (5.3.3 (b) (i))

underbody been covered with underseal (thick)

Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Rear Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

vehicle has had extensive welding repairs carried out and has been covered with thick layer of underseal making examination difficult.

Brake pedal anti-slip provision loose (3.3.A.1b)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

chassis weak in places. all pipes covered in under seal.

Offside Front Braking system leaking (3.6.A.1)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

under side of car heverly under sealed, and pipes.

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)