1990 Toyota MR2

Nearside Rear Macpherson strut pin or bush excessively worn (5.3.4 (a) (i))

Nearside Side repeater with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii))

Offside Side repeater with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Play in steering rack inner joint(s) ()

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

covers and under trays fitted

Nearside Rear Brake pipe slightly damaged (1.1.11 (c))

rear service and parking brake passed on limit-x2 inner and outer sills corroded-inner wheel arches corroded-x2 rear anti roll bar d bushes have slight play-x2 rear tyres on limit

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

slight corrosion to underbody

Exhaust emits blue smoke during acceleration (7.3.A.2c)

all under vehicle corroded/covered by substance unable to check properly-all inner wheel arches corroded/covered by covrs unable to check properly

all welding covered by substance unable to check properly

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Coil spring not correctly located (2.4.C.2)

Direction indicator incorrect colour (1.4.A.2f)

Horn not working (1.6.2a)

Offside Registration plate lamp not working (1.1.C.1d)

Rear Windscreen wiper does not clear the windscreen effectively (8.2.2)

Steering rack gaiter insecure (2.2.D.2d)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

rear brake binding (3.7.B.1)

Exhaust emits blue smoke during acceleration (7.3.A.2c)

all under vehicle corroded/covered by substance unable to check properly-all inner wheel arches corroded/covered by covrs unable to check properly

both rear sill sections corroded

both rear wheels binding slightly

o/s/r tyre worn close to legal limit

Brakes imbalanced across an axle (3.7.B.5b)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Steering rack gaiter split (2.2.D.2d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Rear Parking brake recording little or no effort (3.7.D.3a)

Offside Front Fluid suspension unit leaking (2.4.D.2)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS