1989 Kawasaki KMX125

Front Brake lever has insufficient reserve travel (1.1.2 (a))

Front Direction indicator not working (4.4.1 (a) (ii))

Front Horn not working (7.7 (a))

Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Rear reflector missing (4.8.2 (a) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Rear Stop lamp remains on when the brakes are released (4.3.2 (a) (iii))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

All direction indicators not working (4.4.1 (a) (ii))

Horn sound not in accordance with requirements (7.7 (c))

Nearside Rear All direction indicators missing (4.4.1 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Carb damp

Drive chain slightly tight (6.1.7 (k) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

All direction indicators not working (4.4.1 (a) (ii))

Horn not working (7.7 (a) (ii))

Nearside Rear Direction indicator missing (4.4.1 (a) (ii))

Rear Rear reflector missing (4.8.2 (a) (ii))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Wheel alignment slightly misaligned (2.4 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

All direction indicators not working (4.4.1 (a) (ii))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear reflector missing (4.8.2 (a) (ii))

Rear reflector on motorcycle missing (1.4.1)

Rear suspension movement is excessively stiff (2.4.A.3b)

Registration plate characters incorrectly spaced (6.3.4a)

frame corroding in places.

front brake lever travel alittle long.

rear brake pads on limit.

Rear Registration plate deteriorated (6.3.1d)

frame corroding in places.

front brake lever travel alittle long.

rear brake pads on limit.

front brake pads getting low.

rear brake pads very near limit.

Front Rear mono-shock pivot worn but not excessive (2.4.B.4)

Rear Rear mono-shock pivot worn but not excessive (2.4.B.4)

Rear wheel bearings have slight free play (2.4.A.2c)

Front Wheel spoke slightly corroded. (4.2.1b)

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front brake performance low

Rear suspension stiff