MOT Status
ValidMileage
252,083 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Nail in tyre ()
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive floorpan (7.1.1 (a) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive bulkhead (1.1.21 (e) (i))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive floorpan (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Front Nail in tyre ()
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive floorpan (7.1.1 (a) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive bulkhead (1.1.21 (e) (i))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive floorpan (7.1.1 (a) (i))
Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive bulkhead (1.1.21 (e) (i))
Seat belt anchorage prescribed area is corroded but not considered excessive Both front floorpans (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheelarch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheelarch (5.3.6 (a) (i))
Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive bulkhead (1.1.21 (e) (i))
Seat belt anchorage prescribed area is corroded but not considered excessive Both front floorpans (7.1.1 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Headlamp aim too low (4.1.2 (a))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Headlamp aim too low and too far to the left. (4.1.2 (a))
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Headlamp aim too low (4.1.2 (a))
Offside Headlamp aim too low (4.1.2 (a))
Steering rack has slight free play detected at steering wheel (2.3 (a) (i))
Central Seat belt not functioning as intended (7.1.2 (c))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Central Exhaust has a minor leak of exhaust gases box (7.1.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Rear position lamp(s) slightly affected by the operation of another lamp with indicator. (1.1.A.3f)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive wheel arch. (5.2.6)
Offside Rear Body has slight corrosion (6.1.B.2)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Rear position lamp(s) slightly affected by the operation of another lamp with indicator. (1.1.A.3f)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Exhaust has a minor leak of exhaust gases box (7.1.2)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Central Rear Statutory seat belt missing (5.1.1)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Headlamp switch faulty (1.7.1)
Offside Rear Registration plate lamp shows direct white light to the rear (1.1.C.1f)
Central Exhaust has a minor leak of exhaust gases box (7.1.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Rear position lamp(s) slightly affected by the operation of another lamp with indicator. (1.1.A.3f)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive wheel arch. (5.2.6)
Offside Rear Body has slight corrosion (6.1.B.2)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Rear position lamp(s) slightly affected by the operation of another lamp with indicator. (1.1.A.3f)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Exhaust has a minor leak of exhaust gases box (7.1.2)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Offside head light lens inner reflector corroded
both front anti roll bar D bushes detonating(worn)
both rear wheel arch corroded
o/s/f + n/s/f steering inner tie rod has slight play
o/s/f + n/s/f wheel hub has slight play.
rear diff leaking slightly
Nearside Headlamp aim too high adjuster not working. (1.8)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Headlamp aim too high (1.8)
Offside Stop lamp not working (1.2.1b)
Registration plate lamp not working both (1.1.C.1d)
Offside head light lens inner reflector corroded
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
both front anti roll bar D bushes detonating(worn)
both rear wheel arch corroded
o/s/f + n/s/f steering inner tie rod has slight play
o/s/f + n/s/f wheel hub has slight play.
rear diff leaking slightly
Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement both bushes (2.4.G.2)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
corrosion to n/s/r inner/outer wheel arch
corrosion to o/s/r tow bar mounting area
corrosion to servo mounting plate
diff oil leak
engine/gear box oil leak
rear seat back broken,but does secure in an upright position
Front Brake pad(s) less than 1.5 mm thick both (3.5.1g)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement top axle arm (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement top axle arm (2.4.G.2)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 185/80/14 (4.1.D.1a)
Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement both bushes (2.4.G.2)
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
corrosion to o/s/r tow bar mounting area
corrosion to servo mounting plate
diff oil leak
engine/gear box oil leak
rear brake pads getting low
rear seat back broken,but does secure in an upright position
Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
corrosion to n/s/r outer sill and both rear wheel arches
corrosion to o/s/r inner wheel arch
n/s/r brake pads low
Bonnet cannot be secured in the closed position (8.4.1)
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Headlamp aim too high (1.8)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
corrosion to n/s/r outer sill and both rear wheel arches
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp not working on dipped beam (1.7.5a)
Rear Registration plate lamp not working (1.1.C.1d)
Vehicle structure has slight corrosion (6.1.A.1)
Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Rear Passenger's seat insecure (6.2.A.1)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Rear registration plate delaminated but not likely to be misread (6.3.1d)
corrosion on nearside floor pan
rear no plate in poor condition
tow bar electrics socket missing
Corrosion on nearside front floor pan
Rear number plate in poor condtion
Tow bar electrics socket missing
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Towbar component excessively corroded (6.6.1)
Windscreen washer provides insufficient washer liquid (8.2.3)
Corrosion on nearside front floor pan
Rear number plate in poor condtion
Tow bar electrics socket missing
rear number plate in poor condtion
Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear wheel arches corroded
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear wheel arches corroded
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp damaged but light output not reduced (1.7.5a)
Exhaust has part of the system excessively deteriorated (7.1.1a)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Exhaust mounting missing (7.1.1b)
Offside Rear Seat belt locking mechanism does not secure or release (5.2.5a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp damaged but light output not reduced (1.7.5a)
Centre Stop lamp not working (1.2.1b)
Nearside Front Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.B2)
Offside Front Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.B2)
How Reliable is the Volvo 240?
Based on 134,955 MOT tests across 18,976 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
G683 YTR is a 1990 Volvo 240 in White with a 2,316cc petrol engine. This vehicle has been through 36 MOT tests with a personal pass rate of 58.3%.
Across all 1990 Volvo 240 models, the average MOT pass rate is 66.7% with a typical mileage of 140,536 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Volvo 240 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 6,198 recorded failures. If you're considering buying G683 YTR, it's worth having these areas checked by a mechanic before committing.
The Volvo 240 typically stays on UK roads for around 47 years. At 36 years old, this Volvo 240 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of G683 YTR?
You can check the full history of G683 YTR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was G683 YTR registered?
G683 YTR is a 1990 Volvo 240, first registered on 16 May 1990.
Is G683 YTR safe to buy?
The MOT history for G683 YTR shows 36 tests with a 58.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does G683 YTR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on G683 YTR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.