1998 Mazda MX-5

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Brake cable has restricted free movement (1.1.15 (e))

Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

under vehicle undersealed

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner wing / inner wheel arch in engine bay (6.1.1 (c) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner wing (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced all over under body corrosion (6.1.1 (c) (i))

Offside Headlamp aim too low (4.1.2 (a))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Parking brake inoperative on one side Very low (1.4.1 (a))

Offside Headlamp reflector seriously defective Dip beam and main beam working wrong way round (4.1.1 (b) (ii))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear fog lamp missing (4.5.1 (a) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamps Both (4.7.2 (a))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Sun strip on screen

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security arch (6.2.2 (d) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

wax oil to chassis to floor

Nearside sill showing slight corrosion

Offside sill showing slight corrosion

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded floor to sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

nearside and offside front chassi under wing slightly corodded

nearside and offside front floor slightly corroded

nearside and offside rear inner wheel arches corroded

oil leak

Nearside Front Steering rack gaiter split (2.2.D.2d)

Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Stop lamp not working (1.2.1b)

Parking brake: efficiency below requirements (3.7.B.7)

nearside and offside front chassi corroded

nearside and offside rear under sills corroded

offside front tyre worn on inside edge

Front Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Oil leak

adv front subframe component corroded

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Front Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

Nearside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Oil leak

adv front subframe component corroded

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

adv front subframe and component

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Upper Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Upper Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

adv front subframe and component

Nearside Front Upper Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Upper Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Rear fog lamp not working (1.3.2b)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Rear fog lamp tell tale missing (1.3.1b)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

General surface rusting to suspension and steering components

General surface rusting to underfloor

Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Centre Exhaust has part of the system excessively deteriorated (7.1.1a)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Nearside Rear brake disc slightly pitted (3.5.1h)

Offside Rear brake disc slightly pitted (3.5.1h)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

steel brake pipes need cleaning and oil spraying

Offside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Nearside Rear brake disc slightly pitted (3.5.1h)

Offside Rear brake disc slightly pitted (3.5.1h)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

steel brake pipes need cleaning and oil spraying

Front registration plate deteriorated (6.3.1d)

Rear Rear fog lamp not working (1.3.2b)