1990 Jaguar Xjs

Indicator tell tale audible only

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Indicator tell tale, audible only

Nearside Front Outer sill corroded outside prescribed areas

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Indicator tell tale, audible only

Nearside Front Outer sill corroded outside prescribed areas

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Exhaust emissions hydrocarbon content excessive (7.3.B.1b)

Exhaust system not adequately supported (7.1.1)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Front registration plate deteriorated (6.3.1d)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Steering rack gaiter insecure (2.2.D.2d)

Offside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2) DANGEROUS

Nearside Front Sub-frame rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front Sub-frame rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)

Rear tyres starting to perish

All four Tyres perished and cracking in the sidewalls

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Headlamp aim too low (1.8)

All four Tyres perished and cracking in the sidewalls

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Oil leak

Power steering component(s) has slight seepage from a component (2.3.3b)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

n/s/f brake binding slightly

o/s/f brake binding slightly

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Indicator tell tale inoperative (1.4.A.2a)

Hazard warning tell tale not working correctly (1.4.B.1e)

Nearside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Upper Shock absorber has an excessively worn bush (2.7.4)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Sub-frame corroded and seriously weakened (2.4.G.1)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both rear brake disc corroded

front lower valance corroded and weak

o/s and n/s floor and sill aeras corroded and weak

o/s front inner wing corroded and weak

Bonnet can not be secured in the closed position

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear brake disc slightly pitted (3.5.1h)

Rear wheel bearing has slight play (2.6.2)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front position lamp(s) not working (1.1.A.3b)

Bonnet can not be secured in the closed position

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear brake disc slightly pitted (3.5.1h)

Rear wheel bearing has slight play (2.6.2)