1990 Peugeot 205

Front Brake hose has slight corrosion to ferrule n/s & o/s (1.1.12 (f) (i))

Front Coil spring corroded n/s & o/s (5.3.1 (b) (i))

Front Lower Suspension arm ball joint dust cover severely deteriorated n/s & o/s (5.3.4 (b) (i))

Front Lower Suspension arm corroded but not seriously weakened n/s & o/s (5.3.3 (b) (i))

Nearside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Integral body structure is repaired but structural rigidity is not significantly reduced n/s & o/s inner & outer sills (6.1.1 (d) (i))

brake servo & master cylinder corroded

front & rear shockers corroded

rear bump stops missing

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Brake hose has slight corrosion to ferrule n/s & o/s (1.1.12 (f) (i))

Front Coil spring corroded n/s & o/s (5.3.1 (b) (i))

Front Lower Suspension arm ball joint dust cover severely deteriorated n/s & o/s (5.3.4 (b) (i))

Front Lower Suspension arm corroded but not seriously weakened n/s & o/s (5.3.3 (b) (i))

Nearside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Integral body structure is repaired but structural rigidity is not significantly reduced n/s & o/s inner & outer sills (6.1.1 (d) (i))

brake servo & master cylinder corroded

front & rear shockers corroded

rear bump stops missing

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Front Coil spring corroded n/s & o/s (5.3.1 (b) (i))

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive strut top mount (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Integral body structure is repaired but structural rigidity is not significantly reduced n/s & o/s outer sills (6.1.1 (d) (i))

Rear shock absorbers corroded

brake servo corroded

front reg plate cracked

Front Coil spring corroded n/s & o/s (5.3.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension component mounting repair covered in underseal strut top (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Suspension component mounting repair covered in underseal n/s & o/s inner sills (5.3.6 (a) (i))

brake servo corroded

exhaust mid section corroded

front exhaust mount cracked

Brake hose has slight corrosion to ferrule rears (1.1.12 (f) (i))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Brake cable insecure (1.1.15 (c))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Brake hose has slight corrosion to ferrule rears (1.1.12 (f) (i))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake servo corroded but not excessively weakened (3.6.A.2b)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)

front brake balance on limit 25%