1990 Rover Mini

Rear fog lamp not working (4.5.1 (a) (ii))

Subframe mounting prescribed area is corroded but not considered excessive Rear Subframe Offside Front Mount Area. (5.3.6 (a) (i))

Subframe mounting prescribed area is corroded but not considered excessive Rear Subframe nearside front mount area (5.3.6 (a) (i))

Main beam tell-tale not working Remains on when main beam is off. (4.9.1 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Subframe mounting prescribed area is corroded but not considered excessive Rear Subframe Offside Front Mount Area. (5.3.6 (a) (i))

Subframe mounting prescribed area is corroded but not considered excessive Rear Subframe nearside front mount area (5.3.6 (a) (i))

exhaust blow from manifold to downpipe joint.

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

exhaust blow from manifold to downpipe joint.

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Rear Brake pivot has restricted free movement (1.1.15 (e))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected top shock absorber mounting (5.3.6 (a) (ii)) DANGEROUS

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front floor pan just getting surface rust coming through

Body has slight corrosion (6.1.B.2)

Centre Exhaust system not adequately supported bracket broken (7.1.1)

Nearside Rear rear brake recording little or no effort (3.7.B.5a)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Headlamp aim too low (1.8)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Body has slight corrosion (6.1.B.2)

Fuel pipe/s corroded

NEARSIDE BODY WORK DAMAGED

OFFSIDE FRONT FLOORING TO INNER WHEEL ARCH CORRODED ,NOT WITHIN PRESCRIBED AREA

Nearside Front Headlamp aim too high (1.8)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Fuel pipe/s corroded

NEARSIDE BODY WORK DAMAGED

OFFSIDE FRONT FLOORING TO INNER WHEEL ARCH CORRODED ,NOT WITH IN PRESCRIBED AREA

Oil leak

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Front registration plate insecure (6.3.1b)

Hazard warning switch faulty (1.4.B.1d)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Oil leak

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Offside Front Steering rack gaiter split (2.2.D.2d)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Oil leak

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Oil leak

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Hazard warning switch faulty (1.4.B.1d)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Oil leak

Nearside Rear Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)