1990 Fiat Ducato

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg, towing eye (5.3.6 (a) (i))

Nearside Side repeater not working (4.4.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

engine mountain bolt broken

front brake discs rusty on inner face

h/lamp deflectors fitted

rear bumper corroded

rear tyre walls cracked--advise to replace

slight oil leak

Offside Headlamp aim too low (4.1.2 (a))

Rear fog lamp tell-tale not working (4.9.1 (a) (ii))

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

engine mountain bolt broken

front brake discs rusty on inner face

h/lamp deflectors fitted

rear bumper corroded

rear tyre walls cracked--advise to replace

slight oil leak

Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b))

Nearside Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Nearside Front Suspension component mounting prescribed area is inadequately repaired not a continuous weld on patch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength holed by leaf spring mounting (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is inadequately repaired not a continuous weld on patch (5.3.6 (a) (i))

Offside Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Offside Front Suspension component mounting prescribed area is inadequately repaired not a continuous weld on patch (5.3.6 (a) (i))

Offside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen jet missing screen (3.5 (a))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area is inadequately repaired not a continuous weld on patch (5.3.6 (a) (i))

Nearside Front Bonnet primary retaining device slightly deteriorated hinge corroded (3.1 (c))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front track rod slight play in joint

Nearside Rear slight perishing in wall of tyre

Nearside Suspension component mounting prescribed area is corroded but not considered excessive sill corroded (5.3.6 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Suspension component mounting prescribed area is corroded but not considered excessive sill corrded (5.3.6 (a) (i))

Rear bumper corroded

Nearside Front Inner Track rod end ball joint has slight play (2.2.B.1f)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Rear Rear wheel bearing has excessive play (2.6.2)

Offside Rear Suspension spring mounting prescribed area is excessively corroded 30cm to spring mount (2.4.A.3)

Nearside Front Inner Track rod end ball joint has slight play (2.2.B.1f)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Hazard warning switch faulty (1.4.B.1d)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength not a continuous weld inner arch/sill (2.4.A.3)

Offside Front Headlamp aim too low (1.8)

Offside Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength inner arch/inner sill front repair not a continuous weld poor repair (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength not a continuous weld poor repair (2.4.A.3)

Nearside Front Subframe mounting prescribed area modified, but not inappropriately (2.4.A.3)

Nearside Front Subframe mounting prescribed area modified, but not inappropriately inner arch (2.4.A.3)

Front Windscreen washer provides insufficient washer liquid missing o/s (8.2.3)

Nearside Front Seat belt anchorage prescribed area is excessively corroded inner arch/sill holed (5.2.6)

Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill box section holed (5.2.6)

Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner arch/sill holed (2.4.A.3)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is excessively corroded area has holed (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill holed (2.4.A.3)

Rear fog lamp not working (1.3.2b)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Front brake discs worn/corroded

engine oil leak

Front bumper mounting corroded on offside

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear wheel bearing has slight play (2.6.2)

Nearside Headlamp aim too high (1.8)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp aim too high (1.8)

Front bumper right hand side corroded

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear wheel bearing has slight play (2.6.2)

Brake load sensing valve seized (3.6.E.3)

Hazard warning lamps inoperative (1.4.B.1b)

Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Horn not working (1.6.2a)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Brake hose slightly damaged (3.6.B.4d)

brake discs worn/rusty

rear panel corroded behind bumper

Brakes imbalanced across an axle (3.7.B.5b)

Centre Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Fuel tank leaking (7.2.3)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Horn not working (1.6.2a)

Nearside Body has a sharp edge caused by damage (6.1.C.1)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Registration plate lamp not working (1.1.C.1d)

Both front doors have been taped over corrosion

Both inner wings holed but not within prescribed areas

Fan belt squealing

Front windscreen pillars are corroded and holed as is the scuttle panel

Nearside Front Brake hose slightly chafed (3.6.B.4d)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Offside wheel arch inside door shut is corroded and holed

Suspect both rear wheel cylinders leaking

holed and corroded in several places but not within prescribed areas

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Registration plate lamp not working (1.1.5c)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Exhaust mounting missing (7.1.1b)

Offside Front Statutory seat belt missing (5.1.1)