1989 Jaguar Xjs

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))

Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Front Shock absorbers has an excessively worn bush (5.3.2 (c))

Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Front Driver's seat with a defective structure (6.2.5 (a) (i))

Offside Front Shock absorbers has an excessively worn bush (5.3.2 (c))

Offside Front Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Subframe mounting repair covered in underseal (5.3.6 (a) (i))

oil leak

Offside Front Subframe mounting repair covered in underseal (5.3.6 (a) (i))

oil leak

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Front Sub-frame pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

oil leak

Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Shock absorbers has a serious fluid leak front shock (5.3.2 (b))

Offside Front Sub-frame pin or bush excessively worn (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear wheel bearing has slight play

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

Nearside Front front brake binding (3.7.B.1) DANGEROUS

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front spring bump stop has fallen off within the coil

All tyres age cracking

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

All tyres age cracking

Nearside Rear Rear wheel bearing has slight play (2.6.2)

nearside front tyre age cracking

Nearside Front Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

nearside front tyre age cracking

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Steering rack gaiter split (2.2.D.2d)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Brakes imbalanced across an axle (3.7.B.5b)

Parking brake lever has no reserve travel (3.1.6b)

Registration plate lamp not working (1.1.C.1d)

rear parking brake recording little or no effort (3.7.B.6a)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear wheel bearing has slight play (2.6.2)

rear coil springs very rusty.

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Steering rack gaiter split (2.2.D.2d)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Parking brake lever has no reserve travel (3.1.6b)

Nearside Rear wheel bearing has slight play (2.6.2)

rear coil springs very rusty.

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Sub-frame corroded and seriously weakened (2.4.G.1)

Offside Steering rack gaiter split (2.2.D.2d)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

nearside front tyre sidewall slightly damaged

offside front tyre sidewall cracked/perished

Nearside Front Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Exhaust has a minor leak of exhaust gases (7.1.2)

Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)