1990 Honda CBR1000F

Front Motorcycle structure is fractured but structural rigidity is not significantly reduced Fairing cracked and fasteners missing (6.1.1 (a) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Drive chain worn.

Front Panels slightly loose

Front Tyre worn close to the legal limit (5.2.3 (e))

Heated grip wires need re routing, effecting throttle (Advise attention)

Rear Tyre worn close to the legal limit (5.2.3 (e))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Drive chain worn.

Front Panels slightly loose

Front Tyre worn close to the legal limit (5.2.3 (e))

Heated grip wires need re routing, effecting throttle (Advise attention)

Rear Tyre worn close to the legal limit (5.2.3 (e))

Wheel alignment slightly misaligned (2.4 (a))

Nearside Front Roller brake test indicates a binding brake (3.3.A1a)

Offside Front Roller brake test indicates a binding brake (3.3.A1a)

Nearside Front Brake disc(s) has excessive run out (3.2.A1m)

Nearside Front Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Front Brake disc(s) has excessive run out (3.2.A1m)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear suspension bush has slight free play (2.4.A2a(i))

Centre Rear suspension bush has slight free play (2.4.A2a(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Brake disc(s) has slight run out (3.2.A1m)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Brake disc(s) has slight run out (3.2.A1m)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Registration plate with character(s) which are not the correct height (6.3.4a)

Registration plate with character(s) which are not the correct width (6.3.4a)

Centre Exhaust is leaking but is not excessively noisey (7.1.1b)

Nearside Rear Exhaust is leaking but is not excessively noisey (7.1.1b)