1989 Ford Transit

Front Vehicle structure is corroded but structural rigidity is not significantly reduced both sides (6.1.1 (c) (i))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced step (6.1.1 (c) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both spring mounts (5.3.6 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced both sides (6.1.1 (c) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

o/s head lamp slightly damaged

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Exhaust emissions likely to be affected by an exhaust leak to rear (8.2.2.1 (b))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross member (6.2.2 (d) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Brake performance not tested (1.2.1 (g))

Central Exhaust has a major leak of exhaust gases centre box (6.1.2 (a))

Front Brake pipe excessively corroded front to rear (1.1.11 (c))

Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n s f step inner (6.2.2 (d) (i))

Nearside Rear Floor insecure (6.2.4 (a) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch inner (6.2.2 (d) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear rear sill (6.2.2 (d) (i))

Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear rear sill inner (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill front to rear (6.2.2 (d) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Suspension component mounting prescribed area fractured significantly reducing structural strength inner sliding door (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS

Nearside Rear Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected spring hanger (5.3.6 (a) (ii)) DANGEROUS

Offside Front Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected arch (5.3.6 (a) (ii)) DANGEROUS

Offside Front Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected step (5.3.6 (a) (ii)) DANGEROUS

Offside Rear Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected spring hanger (5.3.6 (a) (ii)) DANGEROUS

Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected cross member (5.3.6 (a) (ii)) DANGEROUS

Nearside Front Direction indicator missing repeater lamp missing (4.4.1 (a) (ii))

Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mounting (5.3.6 (a) (i))

Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front shock absorber mounting (5.3.6 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear Rear fog lamp not working (4.5.1 (a) (ii))

Rear Stop lamp(s) not working both sides (4.3.1 (a) (ii))

Central Propshaft universal joint worn ()

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step (6.1.B.2)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger (6.1.B.2)

Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step (6.1.B.2)

Offside Front Outer Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings step (6.1.B.2)

Offside Rear Shock absorber detached (2.7.2b)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Central Propshaft universal joint worn ()

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Rear wheel bearing has slight play (2.6.2)

Offside Front Rear wheel bearing has slight play (2.6.2)

Nearside Front Headlamp aim too low (1.8)

Nearside Front Subframe mounting prescribed area is excessively corroded subframe mount (2.4.A.3)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Rear wheel bearing has excessive play (2.6.2)

Offside Front Subframe mounting prescribed area is excessively corroded subframe mount (2.4.A.3)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Rear wheel bearing has slight play (2.6.2)

Offside Front Rear wheel bearing has slight play (2.6.2)

Battery insecure (1.9.1)

Nearside Stop lamp not working (1.2.1b)

Registration plate lamp not working (1.1.C.1d)

Nearside Battery insecure (1.9.1)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Stop lamp not working (1.2.1b)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front coil spring broken (2.4.C.1a)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Front Tyre worn close to the legal limit (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Track rod end ball joint has slight play (2.2.B.1f)

Front Body has slight corrosion (6.1.B.2)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Body has slight corrosion (6.1.B.2)

Battery insecure (1.9.1)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Headlamp aim too high (1.8)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Suspension spring mounting prescribed area is fractured (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front coil spring broken (2.4.C.1a)

Offside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Offside Headlamp aim too low (1.8)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

both front seat rails are worn but seats fully secured

brake service

leasure battery not connected

off side inner sill to door step is heavily corroded but not wihtin a percribed area

signes of poor weld repairs done prior to mot test

sill backings corroded were no underseal has been applyed

underbody undersealed and difficult to inspect

Battery insecure (1.9.1)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front coil spring broken (2.4.C.1a)

Offside Headlamp aim too high (1.8)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Side repeater not working (1.4.A.2c)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Registration plate lamp not working (1.1.C.1d)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Power steering component(s) leaking from a failed seal (2.3.3b)

front o/s n/s brake discs corroding on limits

o/s n/s door steps corroded weak

Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear rear brake application uneven (3.7.B.2)

door steps corroding o/s n/s

front brake discs badly corroded change asap

powersreeing has slight leak

Front wheel bearing has slight play (2.5.A.3c)

Offside Rear fog lamp not working (1.3.2b)

Registration plate lamp not working (1.1.5c)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Suspension arm locating pin retaining device missing (2.4.G.3b)

Nearside Front Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength (2.4.A.3)

Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Steering rack gaiter split (2.2.D.2d)

Offside Rear Stop lamp not working (1.2.1b)

Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Windscreen washer provides insufficient washer liquid (8.2.3)