1989 Mazda 323

Body has corrosion

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Floor. (6.2.2 (d) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Outer sill. (6.2.2 (d) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Brake hose excessively damaged (1.1.12 (b) (ii))

Offside Front Brake hose excessively damaged (1.1.12 (b) (ii))

Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill (6.1.1 (c) (ii)) DANGEROUS

Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill (6.1.1 (c) (ii)) DANGEROUS

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill to floor (6.1.1 (c) (i))

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

generally underside of vehicle very rusty

Hazard warning lamps inoperative (1.4.B.1b)

Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front coil spring corroded (2.4.C.1b)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Rear coil spring corroded (2.4.C.1b)

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Hazard warning switch faulty (1.4.B.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Body has a sharp edge caused by damage (6.1.C.1)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front coil spring corroded (2.4.C.1b)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Rear coil spring corroded (2.4.C.1b)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear coil spring corroded (2.4.C.1b)

EXHAUST MANIFOLD TO DOWN PIPE JIONT HAS SLIGHT BLOW

N/S AND O/S INNER SILL RISERS STARTING TO CORO

N/S/R AND O/S/R OUTTER SILL STARTING TO CORO

N/S/R TYRE 1.6MM OUTTER EDGE

N/S/R TYRE 1.6MM OUTTER EDGE