2016 Lexmoto Xflm

Brake lever has insufficient reserve travel (1.1.2 (a))

Brake pedal anti-slip provision missing (1.1.2 (c))

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Rear Brake pedal pivot excessively worn (1.1.1 (b))

Rear Footrest missing (6.2.12 (a))

Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Upper Shock absorber has an excessively worn bush (5.3.2 (c))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Front Brake component insecure HOSE (1.1.21 (c))

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Headlamp insecure (4.1.1 (c))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Offside Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear CUT IN REAR TYRE BUT WITHIN REQUIREMENTS

Rear Wheel alignment slightly misaligned (2.4 (a))

Central Front Headlamp aim too low (4.1.2 (a))

Central Front Headlamp insecure (4.1.1 (c))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Rear Rear reflector missing (4.8.2 (a) (ii))

Rear Registration plate does not conform to the specified requirements UNDER SIZED. NO MAKERS MARK OR TYPE APPROVAL (0.1 (d))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Offside Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear CUT IN REAR TYRE BUT WITHIN REQUIREMENTS

Rear Wheel alignment slightly misaligned (2.4 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake disc worn

Headlamp output would be better with a traditional bulb

Play in rear wheel bearing.

Rear Brake disc worn

Rear Brake pivot worn, but not excessively Foot brake lever pivot worn (1.1.15 (b))

Rear Cut in rear tyre.

Rear Outer Brake pad(s) close to minimum limit (1.1.13 (a))