2004 Fiat Doblo

Front Anti-roll bar pin or bush worn but not resulting in excessive movement both d bushes (5.3.4 (a) (i))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear both sides (5.3.4 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Inner Road wheel slightly distorted Rim (5.2.2 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge bald inner (5.2.3 (e))

Offside Front Inner Road wheel slightly distorted Rim (5.2.2 (c) (i))

Offside Front Tyre worn close to legal limit/worn on edge bald inner (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust has a minor leak of exhaust gases silencer (6.1.2 (a))

Rear Tyre slightly damaged/cracking or perishing both cracking (5.2.3 (d) (ii))

Spare tyre defective bald on inner and badly cracking ()

Central Rear Passenger's seat backrest cannot be secured in the upright position. (6.2.6 (a) (i))

Central Rear Seat belt not functioning as intended (7.1.2 (c))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Exhaust emissions exceed manufacturer's specified limit 1.12 (8.2.2.2 (a))

Offside Front Position lamp not working (4.2.1 (a))

Offside Rear Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement both d bushes (5.3.4 (a) (i))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear both sides (5.3.4 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Inner Road wheel slightly distorted Rim (5.2.2 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge bald inner (5.2.3 (e))

Offside Front Inner Road wheel slightly distorted Rim (5.2.2 (c) (i))

Offside Front Tyre worn close to legal limit/worn on edge bald inner (5.2.3 (e))

Offside Headlamp aim too low (4.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust has a minor leak of exhaust gases silencer (6.1.2 (a))

Rear Tyre slightly damaged/cracking or perishing both cracking (5.2.3 (d) (ii))

Spare tyre defective bald on inner and badly cracking ()

Offside Registration plate lamp not working (1.1.C.1d)

Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Headlamp aim too high both (1.8)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nail in offside rear tyre

Passenger seat(s) missing at time of test

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush (2.4.B.2)

Passenger seat(s) missing at time of test

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too high (1.8)

Nearside Rear Upper Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Headlamp aim too high and too far to the right. (1.8)

Offside Rear Upper Anti-roll bar has slight play in a ball joint (2.4.G.2)

stone chips on windscreen

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Upper Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Rear Upper Anti-roll bar has slight play in a ball joint (2.4.G.2)

stone chips on windscreen

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear registration plate letter/figure incomplete (6.3.1c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)