2012 Mercedes-benz C

Nearside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Suspension arm ball joint excessively worn BALL JOINT FACING UP (MARKED) (5.3.4 (a) (i))

Offside Suspension arm ball joint excessively worn BALL JOINT FACING UP (MARKED) (5.3.4 (a) (i))

BOTH REAR TYRES WEARING INNER TREAD

Nearside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Stop lamp(s) light intensity obviously reduced ALL NOT WORKING (4.3.3 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Suspension arm ball joint excessively worn BALL JOINT FACING UP (MARKED) (5.3.4 (a) (i))

Parking brake lever inoperative (1.1.6 (d))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Parking brake lever defective but can be satisfactorily operated (1.1.6 (d))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Headlamp aim too low and too far to the right. (4.1.2 (a))

Nearside Front Lower Suspension component ball joint excessively worn Marked (5.3.4 (a) (i))

Parking brake lever ratchet not holding correctly N/S/R low reading. (1.1.6 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Lower Suspension arm ball joint excessively worn rear (5.3.4 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Lower Suspension arm ball joint excessively worn rear (5.3.4 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Brake lever not releasing correctly (1.1.2 (b) (i))

Unable to see true condition of rear inner pads.

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Suspension component ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Brake lever not releasing correctly (1.1.2 (b) (i))

Unable to see true condition of rear inner pads.

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Lower Suspension arm ball joint excessively worn track control arm (5.3.4 (a) (i))

Offside Windscreen damaged but not adversely affecting driver's view stone chip (3.2 (a) (i))

Parking brake lever defective but can be satisfactorily operated (1.1.6 (d))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Offside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Rear fog lamp not working (4.5.1 (a) (ii))

Central Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Parking brake inoperative on one side Low effort (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake inoperative on one side Low effort (1.4.1 (a))

Nearside Front Upper Anti-roll bar linkage pin or bush likely to become detached Appears insecure. (5.3.4 (a) (ii)) DANGEROUS

Nearside Rear Tyre worn close to the legal limit 2MM (4.1.E.1)

Offside Rear Tyre worn close to the legal limit 2MM (4.1.E.1)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Tyre worn close to the legal limit 2MM (4.1.E.1)

Offside Rear Tyre worn close to the legal limit 2MM (4.1.E.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)