2002 Mazda 6

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security whole under car (6.2.2 (d) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security whole under car (6.2.2 (d) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Position lamp not working (4.2.1 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/f inner & outer sill. (6.1.B.2)

Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/r outer sill. (6.1.B.2)

corrosion to sills , underbody & subframes.

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

slight brake drag offside rear

surface corrosion to underside

Nearside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Under-trays fitted obscuring some underside components

Rear Brake pad(s) wearing thin (3.5.1g)

rear suspenion and arm corroded

Nearside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brake pad(s) wearing thin (3.5.1g)

rear suspenion and arm corroded

rear suspension arms corroded

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Stop lamp not working (1.2.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Steering column movement between the shaft and steering wheel (2.1.2b)

Rear Brake pad(s) wearing thin (3.5.1g)

rear suspension arms corroded

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp aim too low (1.8)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

both rear tyres outer wall deteriorated

rear brake discs slightly pitted

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

both rear tyres outer wall deteriorated

rear brake discs slightly pitted

lots surface corosion on rear suspention arms & front suspention arm lots surface corosion osr & nsr floor to sill

Rear Exhaust system not adequately supported (7.1.1)

Registration plate lamp not working (1.1.5c)

slight corrosion of exhaust system

slight stone chip in front screen