MOT Status
ExpiredMileage
114,209 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive Transmission (8.4.1 (a) (i))
Power steering pipe/hose has slight seepage (2.1.5 (a))
Rear Gearbox mounting defective ()
Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive Transmission (8.4.1 (a) (i))
Power steering pipe/hose has slight seepage (2.1.5 (a))
Rear Gearbox mounting defective ()
Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Gearbox mounting defective
Power steering pipe/hose has slight seepage (2.1.5 (a))
Subframe mounting prescribed area is corroded but not considered excessive / all suspension (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Gearbox mounting defective ()
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Power steering pipe/hose has slight seepage (2.1.5 (a))
Rear Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Subframe mounting prescribed area is corroded but not considered excessive / all suspension (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Headlamp aim too high (4.1.2 (a))
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Gearbox mounting defective ()
Power steering pipe/hose has slight seepage (2.1.5 (a))
Rear Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Subframe mounting prescribed area is corroded but not considered excessive / all suspension (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Power steering pipe/hose has slight seepage (2.1.5 (a))
Rear Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Front Brake binding slightly
Nearside Front Shock absorber has a light misting of oil Slight misting (2.7.3)
Nearside Rear Tyre has nail in
Offside Rear Shock absorber has a light misting of oil Slight misting (2.7.3)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear fog lamp not working (1.3.2b)
Child seat fitted not allowing full inspection of adult belt
center exhaust mounts corroded.
Rear Exhaust system not adequately supported (7.1.1)
Child seat fitted not allowing full inspection of adult belt
center exhaust mounts corroded.
Child seat fitted not allowing full inspection of adult belt
Engine covers fitted obscuring some components in the engine bay
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Power steering fluid level low, but not below minimum (2.3.1)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Under-trays fitted obscuring some underside components
Vehicle's internal headlight adjuster altered to recheck lights
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Brake hose twisted (3.6.B.4c)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Child seat fitted not allowing full inspection of adult belt
Engine covers fitted obscuring some components in the engine bay
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Power steering fluid level low, but not below minimum (2.3.1)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Under-trays fitted obscuring some underside components
Vehicle's internal headlight adjuster altered to recheck lights
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
front brake pads slightly worn
front bumper in poor condition
front brake pads slightly worn
front bumper in poor condition
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
GF02 LLJ is a 2002 Mazda 6 in Black with a 1,999cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 70.8%.
Across all 2002 Mazda 6 models, the average MOT pass rate is 71.4% with a typical mileage of 78,488 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying GF02 LLJ, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 24 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of GF02 LLJ?
You can check the full history of GF02 LLJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was GF02 LLJ registered?
GF02 LLJ is a 2002 Mazda 6, first registered on 20 May 2002.
Is GF02 LLJ safe to buy?
The MOT history for GF02 LLJ shows 24 tests with a 70.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does GF02 LLJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on GF02 LLJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.