2005 Citroen C3

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Tyre slightly damaged/cracking or perishing Both nearside and offside and worn on inner edges (5.2.3 (d) (ii))

Brake pipe excessively corroded All (1.1.11 (c))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Tyre slightly damaged/cracking or perishing Both nearside and offside and worn on inner edges (5.2.3 (d) (ii))

Brake pipe corroded, covered in grease or other material All pipes corroded (1.1.11 (c))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Emissions not tested (8.2.1.2 (d))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Position lamp not working (4.2.1 (a))

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (i))

Rear Exhaust has a major leak of exhaust gases Back box (6.1.2 (a))

Brake pipe corroded, covered in grease or other material All pipes corroded (1.1.11 (c))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe slightly corroded At abs unit and greased (3.6.B.2c)

Offside rear tyre cracked and perished

Rear Brake pipe slightly corroded Both nearside and offside (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Side repeater incorrect colour (1.4.A.2f)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Side repeater slightly discoloured (1.4.A.2f)

handbrake feels heavy

offside front tyre outer edge wearing and general wear @2/2.5mm ( limit 1.6mm )

recom wheel allignment check

slight irreguar wear and slight tread cracking at nearside rear tyre

wheel trims and part rear underbody covers fitted not allowing full inspection ( nearside front wheel trim missing )

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Rear Stop lamp not working (1.2.1b)

Items removed from driver's view prior to test

Side repeater slightly discoloured (1.4.A.2f)

all tyre pressures low ( adjusted )

handbrake feels heavy

offside front tyre outer edge wearing and general wear @2/2.5mm ( limit 1.6mm )

recom wheel allignment check

slight irreguar wear and slight tread cracking at nearside rear tyre

wheel trims and part rear underbody covers fitted not allowing full inspection ( nearside front wheel trim missing )

exhaust back box deteriorated

Offside Track rod end ball joint has excessive play (2.2.B.1f)

exhaust back box deteriorated

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

exhaust back box outer skin corroded

slight lip on front brake discs

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Headlamp not working on dipped beam (1.7.5a)